[PATCH v3 0/2] Add 802.1AD protocol support for dsa switch and ocelot driver

From: "hongbo.wang" <redacted>

1. the patch 0001* is for setting single port into 802.1AD(QinQ) mode,
before this patch, the function dsa_slave_vlan_rx_add_vid didn't pass 
the parameter "proto" to next port level, so switch's port can't get
parameter "proto"
  after applying this patch, we can use the following commands to set port 
to enable or disable QinQ mode:
  ip link add link swp1 name swp1.100 type vlan protocol 802.1ad id 100
  ip link del link swp1 name swp1.100

2. the patch 0002* is for setting QinQ related registers in ocelot 
switch driver, after applying this patch, the switch(VSC99599)'s port can
enable or disable QinQ mode.

hongbo.wang (2):
  net: dsa: Add protocol support for 802.1AD when adding or  deleting
    vlan for dsa switch and port
  net: dsa: ocelot: Add support for QinQ Operation

 drivers/net/dsa/ocelot/felix.c     |  8 ++++++
 drivers/net/ethernet/mscc/ocelot.c | 44 ++++++++++++++++++++++++------
 include/net/switchdev.h            |  1 +
 include/soc/mscc/ocelot.h          |  1 +
 net/dsa/dsa_priv.h                 |  4 +--
 net/dsa/port.c                     |  6 ++--
 net/dsa/slave.c                    |  9 +++---
 net/dsa/tag_8021q.c                |  4 +--
 8 files changed, 59 insertions(+), 18 deletions(-)

-- 
2.17.1