[RFC PATCH 11/35] r8169: Change PCIBIOS_SUCCESSFUL to 0
From: Saheed O. Bolarinwa <hidden>
Date: 2020-07-13 13:25:11
Also in:
linux-kernel-mentees, linux-pci, lkml
Subsystem:
8169 10/100/1000 gigabit ethernet driver, networking drivers, the rest · Maintainers:
Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
In reference to the PCI spec (Chapter 2), PCIBIOS* is an x86 concept. Their scope should be limited within arch/x86. Change all PCIBIOS_SUCCESSFUL to 0 Signed-off-by: "Saheed O. Bolarinwa" <redacted> --- drivers/net/ethernet/realtek/r8169_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index b660ddbe4025..206dac958cb2 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c@@ -2656,7 +2656,7 @@ static void rtl_csi_access_enable(struct rtl8169_private *tp, u8 val) * first and if it fails fall back to CSI. */ if (pdev->cfg_size > 0x070f && - pci_write_config_byte(pdev, 0x070f, val) == PCIBIOS_SUCCESSFUL) + pci_write_config_byte(pdev, 0x070f, val) == 0) return; netdev_notice_once(tp->dev,
--
2.18.2