[PATCH RFC net-next 05/13] net: phylink: update PCS when changing interface during resolution
From: Russell King <hidden>
Date: 2020-06-30 14:29:02
Subsystem:
ethernet phy library, networking drivers, sff/sfp/sfp+ module support, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Russell King, Linus Torvalds
The only PHYs that are used with phylink which change their interface are the BCM84881 and MV88X3310 family, both of which only change their interface modes on link-up events. This will break when drivers are converted to split-PCS. Fix this. Signed-off-by: Russell King <redacted> --- drivers/net/phy/phylink.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 1507ea8a9385..f1693ec63366 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c@@ -629,8 +629,15 @@ static void phylink_resolve(struct work_struct *w) phylink_link_down(pl); cur_link_state = false; } + phylink_pcs_config(pl, false, &link_state); + pl->link_config.interface = link_state.interface; + } else { + /* The interface remains unchanged, only the speed, + * duplex or pause settings have changed. Call the + * old mac_config() method to configure the MAC/PCS. + */ + phylink_mac_config(pl, &link_state); } - phylink_mac_config(pl, &link_state); } if (link_state.link != cur_link_state) {
--
2.20.1