[net-next v2 13/13] igc: Remove checking media type during MAC initialization
From: Jeff Kirsher <hidden>
Date: 2020-06-30 01:28:20
Subsystem:
intel ethernet drivers, networking drivers, the rest · Maintainers:
Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Sasha Neftin <redacted> i225 device support only copper mode. There is no point to check media type in the igc_config_fc_after_link_up() method. Signed-off-by: Sasha Neftin <redacted> Tested-by: Aaron Brown <redacted> Signed-off-by: Jeff Kirsher <redacted> --- drivers/net/ethernet/intel/igc/igc_mac.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/intel/igc/igc_mac.c b/drivers/net/ethernet/intel/igc/igc_mac.c
index 9a5e44ef45f4..b47e7b0a6398 100644
--- a/drivers/net/ethernet/intel/igc/igc_mac.c
+++ b/drivers/net/ethernet/intel/igc/igc_mac.c@@ -468,10 +468,8 @@ s32 igc_config_fc_after_link_up(struct igc_hw *hw) * so we had to force link. In this case, we need to force the * configuration of the MAC to match the "fc" parameter. */ - if (mac->autoneg_failed) { - if (hw->phy.media_type == igc_media_type_copper) - ret_val = igc_force_mac_fc(hw); - } + if (mac->autoneg_failed) + ret_val = igc_force_mac_fc(hw); if (ret_val) { hw_dbg("Error forcing flow control settings\n");
@@ -483,7 +481,7 @@ s32 igc_config_fc_after_link_up(struct igc_hw *hw) * has completed, and if so, how the PHY and link partner has * flow control configured. */ - if (hw->phy.media_type == igc_media_type_copper && mac->autoneg) { + if (mac->autoneg) { /* Read the MII Status Register and check to see if AutoNeg * has completed. We read this twice because this reg has * some "sticky" (latched) bits.
--
2.26.2