Re: Don't initialise ports with no PHY

On 30. Apr 2020, at 23:36, Darren Stevens [off-list ref] wrote:

Hello Christian

quoted

On 29/04/2020, Christian Zigotzky wrote:

quoted

quoted

On 29. Apr 2020, at 17:22, Andrew Lunn [off-list ref] wrote:

?On Wed, Apr 29, 2020 at 03:55:28PM +0200, Christian Zigotzky wrote:

quoted

Hi Andrew,

You can find some dtb and source files in our kernel package.

Download: http://www.xenosoft.de/linux-image-5.7-rc3-X1000_X5000.tar.gz

I have the tarball. Are we talking about

linux-image-5.7-rc3-X1000_X5000/X5000_and_QEMU_e5500/dtbs/X5000_20/cyrus.eth.dtb

quoted

quoted

I don't see any status = "disabled"; in the blob. So i would expect
the driver to probe.

No, the vendor never added that to them.

quoted

Yes, that's correct but maybe Darren uses another dtb file.

@Darren
Which dtb file do you use?

My current one attached, including updated cyrus_p5020.dts & p5020si-pre.dtsi
which I'm preparing patches for.

Christian, build an unmodified kernel, select board level reset or power off,
then both the GPIO drivers.
Then under LED Support: GPIO connected LED's and triggers -> disk activity

I think you still have a 5020 don't you? I'll look at 5040 later (I'll need
someone to test)

Regards
Darren
<cyrus-dts.zip>

Darren

I use a 5040 currently.

Thanks
Christian