[PATCH net-next v4 1/4] dt-bindings: net: Add tx and rx internal delays
From: Dan Murphy <hidden>
Date: 2020-05-27 16:49:54
Also in:
linux-devicetree, lkml
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
tx-internal-delays and rx-internal-delays are a common setting for RGMII capable devices. These properties are used when the phy-mode or phy-controller is set to rgmii-id, rgmii-rxid or rgmii-txid. These modes indicate to the controller that the PHY will add the internal delay for the connection. Signed-off-by: Dan Murphy <redacted> --- .../bindings/net/ethernet-controller.yaml | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index ac471b60ed6a..70702a4ef5e8 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml@@ -143,6 +143,20 @@ properties: Specifies the PHY management type. If auto is set and fixed-link is not specified, it uses MDIO for management. + rx-internal-delay-ps: + $ref: /schemas/types.yaml#definitions/uint32 + description: | + RGMII Receive PHY Clock Delay defined in pico seconds. This is used for + PHY's that have configurable RX internal delays. This property is only + used when the phy-mode or phy-connection-type is rgmii-id or rgmii-rxid. + + tx-internal-delay-ps: + $ref: /schemas/types.yaml#definitions/uint32 + description: | + RGMII Transmit PHY Clock Delay defined in pico seconds. This is used for + PHY's that have configurable TX internal delays. This property is only + used when the phy-mode or phy-connection-type is rgmii-id or rgmii-txid. + fixed-link: allOf: - if:
--
2.26.2