[PATCH net-next] net: phy: realtek: add loopback support for RTL8211F
From: Huazhong Tan <hidden>
Date: 2020-05-13 08:27:17
Also in:
lkml
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Yufeng Mo <redacted> PHY loopback is already supported by genphy driver. This patch adds the set_loopback interface to RTL8211F PHY driver, so the PHY selftest can run properly on it. Signed-off-by: Yufeng Mo <redacted> Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <redacted> --- drivers/net/phy/realtek.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index c7229d0..6c5918c 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c@@ -615,6 +615,7 @@ static struct phy_driver realtek_drvs[] = { .resume = genphy_resume, .read_page = rtl821x_read_page, .write_page = rtl821x_write_page, + .set_loopback = genphy_loopback, }, { .name = "Generic FE-GE Realtek PHY", .match_phy_device = rtlgen_match_phy_device,
--
2.7.4