From: Vladimir Oltean <vladimir.oltean@nxp.com>
We don't want ocelot_port_set_maxlen to enable pause frame TX, just to
adjust the pause thresholds.
Move the unconditional enabling of pause TX to ocelot_init_port. There
is no good place to put such setting because it shouldn't be
unconditional. But at the moment it is, we're not changing that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
Changes in v3:
None.
Changes in v2:
None.
drivers/net/ethernet/mscc/ocelot.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index 266e69252232..d9b0918080c5 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -2013,6 +2013,7 @@ void ocelot_port_set_maxlen(struct ocelot *ocelot, int port, size_t sdu)
{
struct ocelot_port *ocelot_port = ocelot->ports[port];
int maxlen = sdu + ETH_HLEN + ETH_FCS_LEN;
+ int pause_start, pause_stop;
int atop_wm;
if (port == ocelot->npi) {@@ -2026,13 +2027,13 @@ void ocelot_port_set_maxlen(struct ocelot *ocelot, int port, size_t sdu)
ocelot_port_writel(ocelot_port, maxlen, DEV_MAC_MAXLEN_CFG);
- /* Set Pause WM hysteresis
- * 152 = 6 * maxlen / OCELOT_BUFFER_CELL_SZ
- * 101 = 4 * maxlen / OCELOT_BUFFER_CELL_SZ
- */
- ocelot_write_rix(ocelot, SYS_PAUSE_CFG_PAUSE_ENA |
- SYS_PAUSE_CFG_PAUSE_STOP(101) |
- SYS_PAUSE_CFG_PAUSE_START(152), SYS_PAUSE_CFG, port);
+ /* Set Pause watermark hysteresis */
+ pause_start = 6 * maxlen / OCELOT_BUFFER_CELL_SZ;
+ pause_stop = 4 * maxlen / OCELOT_BUFFER_CELL_SZ;
+ ocelot_rmw_rix(ocelot, SYS_PAUSE_CFG_PAUSE_START(pause_start),
+ SYS_PAUSE_CFG_PAUSE_START_M, SYS_PAUSE_CFG, port);
+ ocelot_rmw_rix(ocelot, SYS_PAUSE_CFG_PAUSE_STOP(pause_stop),
+ SYS_PAUSE_CFG_PAUSE_STOP_M, SYS_PAUSE_CFG, port);
/* Tail dropping watermark */
atop_wm = (ocelot->shared_queue_sz - 9 * maxlen) /
@@ -2095,6 +2096,10 @@ void ocelot_init_port(struct ocelot *ocelot, int port)
ocelot_port_writel(ocelot_port, 0, DEV_MAC_FC_MAC_HIGH_CFG);
ocelot_port_writel(ocelot_port, 0, DEV_MAC_FC_MAC_LOW_CFG);
+ /* Enable transmission of pause frames */
+ ocelot_rmw_rix(ocelot, SYS_PAUSE_CFG_PAUSE_ENA, SYS_PAUSE_CFG_PAUSE_ENA,
+ SYS_PAUSE_CFG, port);
+
/* Drop frames with multicast source address */
ocelot_rmw_gix(ocelot, ANA_PORT_DROP_CFG_DROP_MC_SMAC_ENA,
ANA_PORT_DROP_CFG_DROP_MC_SMAC_ENA,
--
2.25.1