While the SPI version of the KS8851 requires a TX worker thread to pump
data via SPI, the parallel bus version can write data into the TX FIFO
directly in .ndo_start_xmit, as the parallel bus access is much faster
and does not sleep. Factor out this TX work flush part, so it can be
overridden by the parallel bus driver.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <redacted>
Cc: YueHaibing <redacted>
---
V3: New patch
V4: No change
V5: No change
---
drivers/net/ethernet/micrel/ks8851.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c
index 791b2f14dd9d..20c07e229e12 100644
--- a/drivers/net/ethernet/micrel/ks8851.c
+++ b/drivers/net/ethernet/micrel/ks8851.c
@@ -781,6 +781,17 @@ static void ks8851_tx_work(struct work_struct *work)
ks8851_unlock(ks, &flags);
}
+/**
+ * ks8851_flush_tx_work - flush outstanding TX work
+ * @ks: The device state
+ */
+static void ks8851_flush_tx_work(struct ks8851_net *ks)
+{
+ struct ks8851_net_spi *kss = to_ks8851_spi(ks);
+
+ flush_work(&kss->tx_work);
+}
+
/**
* ks8851_net_open - open network device
* @dev: The network device being opened.@@ -880,11 +891,8 @@ static int ks8851_net_open(struct net_device *dev)
static int ks8851_net_stop(struct net_device *dev)
{
struct ks8851_net *ks = netdev_priv(dev);
- struct ks8851_net_spi *kss;
unsigned long flags;
- kss = to_ks8851_spi(ks);
-
netif_info(ks, ifdown, dev, "shutting down\n");
netif_stop_queue(dev);@@ -896,7 +904,7 @@ static int ks8851_net_stop(struct net_device *dev)
ks8851_unlock(ks, &flags);
/* stop any outstanding work */
- flush_work(&kss->tx_work);
+ ks8851_flush_tx_work(ks);
flush_work(&ks->rxctrl_work);
ks8851_lock(ks, &flags);
--
2.25.1