[RFC v2 3/9] thermal: Properly handle mode values in .set_mode()
From: Andrzej Pietrasiewicz <hidden>
Date: 2020-04-14 18:02:12
Also in:
linux-acpi, linux-arm-kernel, linux-pm, platform-driver-x86
Subsystem:
acer aspire one temperature and fan driver, mellanox ethernet switch drivers, networking drivers, the rest, thermal, x86 platform drivers · Maintainers:
Peter Kaestle, Ido Schimmel, Petr Machata, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds, Rafael J. Wysocki, Daniel Lezcano, Hans de Goede, Ilpo Järvinen
Allow only THERMAL_DEVICE_ENABLED and THERMAL_DEVICE_DISABLED as valid states to transition to. Signed-off-by: Andrzej Pietrasiewicz <redacted> --- drivers/net/ethernet/mellanox/mlxsw/core_thermal.c | 8 ++++++-- drivers/platform/x86/acerhdf.c | 4 ++++ drivers/thermal/imx_thermal.c | 4 +++- drivers/thermal/intel/intel_quark_dts_thermal.c | 5 ++++- drivers/thermal/of-thermal.c | 4 +++- 5 files changed, 20 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
index ce0a6837daa3..cd435ca7adbe 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c@@ -296,8 +296,10 @@ static int mlxsw_thermal_set_mode(struct thermal_zone_device *tzdev, if (mode == THERMAL_DEVICE_ENABLED) tzdev->polling_delay = thermal->polling_delay; - else + else if (mode == THERMAL_DEVICE_DISABLED) tzdev->polling_delay = 0; + else + return -EINVAL; mutex_unlock(&tzdev->lock);
@@ -486,8 +488,10 @@ static int mlxsw_thermal_module_mode_set(struct thermal_zone_device *tzdev, if (mode == THERMAL_DEVICE_ENABLED) tzdev->polling_delay = thermal->polling_delay; - else + else if (mode == THERMAL_DEVICE_DISABLED) tzdev->polling_delay = 0; + else + return -EINVAL; mutex_unlock(&tzdev->lock);
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 8cc86f4e3ac1..d5188c1d688b 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c@@ -431,6 +431,10 @@ static int acerhdf_get_mode(struct thermal_zone_device *thermal, static int acerhdf_set_mode(struct thermal_zone_device *thermal, enum thermal_device_mode mode) { + if (mode != THERMAL_DEVICE_DISABLED && + mode != THERMAL_DEVICE_ENABLED) + return -EINVAL; + if (mode == THERMAL_DEVICE_DISABLED && kernelmode) acerhdf_revert_to_bios_mode(); else if (mode == THERMAL_DEVICE_ENABLED && !kernelmode)
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index e761c9b42217..36b1924f1938 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c@@ -361,7 +361,7 @@ static int imx_set_mode(struct thermal_zone_device *tz, data->irq_enabled = true; enable_irq(data->irq); } - } else { + } else if (mode == THERMAL_DEVICE_DISABLED) { regmap_write(map, soc_data->sensor_ctrl + REG_CLR, soc_data->measure_temp_mask); regmap_write(map, soc_data->sensor_ctrl + REG_SET,
@@ -374,6 +374,8 @@ static int imx_set_mode(struct thermal_zone_device *tz, disable_irq(data->irq); data->irq_enabled = false; } + } else { + return -EINVAL; } data->mode = mode;
diff --git a/drivers/thermal/intel/intel_quark_dts_thermal.c b/drivers/thermal/intel/intel_quark_dts_thermal.c
index d704fc104cfd..11d7db895125 100644
--- a/drivers/thermal/intel/intel_quark_dts_thermal.c
+++ b/drivers/thermal/intel/intel_quark_dts_thermal.c@@ -325,8 +325,11 @@ static int sys_set_mode(struct thermal_zone_device *tzd, mutex_lock(&dts_update_mutex); if (mode == THERMAL_DEVICE_ENABLED) ret = soc_dts_enable(tzd); - else + else if (mode == THERMAL_DEVICE_DISABLED) ret = soc_dts_disable(tzd); + else + return -EINVAL; + mutex_unlock(&dts_update_mutex); return ret;
diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
index 874a47d6923f..36bebf623980 100644
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c@@ -289,9 +289,11 @@ static int of_thermal_set_mode(struct thermal_zone_device *tz, if (mode == THERMAL_DEVICE_ENABLED) { tz->polling_delay = data->polling_delay; tz->passive_delay = data->passive_delay; - } else { + } else if (mode == THERMAL_DEVICE_DISABLED) { tz->polling_delay = 0; tz->passive_delay = 0; + } else { + return -EINVAL; } mutex_unlock(&tz->lock);
--
2.17.1