Thread (1 message) 1 message, 1 author, 2020-04-30

[PATCH AUTOSEL 4.14 25/27] macsec: avoid to set wrong mtu

flat view
DORMANTno replies

From: Sasha Levin <sashal@kernel.org>
Date: 2020-04-30 13:59:10
Also in: lkml, stable
Subsystem: networking drivers, networking [macsec], the rest · Maintainers: Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Sabrina Dubroca, Linus Torvalds

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit 7f327080364abccf923fa5a5b24e038eb0ba1407 ]

When a macsec interface is created, the mtu is calculated with the lower
interface's mtu value.
If the mtu of lower interface is lower than the length, which is needed
by macsec interface, macsec's mtu value will be overflowed.
So, if the lower interface's mtu is too low, macsec interface's mtu
should be set to 0.

Test commands:
    ip link add dummy0 mtu 10 type dummy
    ip link add macsec0 link dummy0 type macsec
    ip link show macsec0

Before:
    11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 4294967274
After:
    11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 0

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/macsec.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c
index 5959e8817a1b8..926e2eb528fd4 100644
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -3209,11 +3209,11 @@ static int macsec_newlink(struct net *net, struct net_device *dev,
 			  struct netlink_ext_ack *extack)
 {
 	struct macsec_dev *macsec = macsec_priv(dev);
+	rx_handler_func_t *rx_handler;
+	u8 icv_len = DEFAULT_ICV_LEN;
 	struct net_device *real_dev;
-	int err;
+	int err, mtu;
 	sci_t sci;
-	u8 icv_len = DEFAULT_ICV_LEN;
-	rx_handler_func_t *rx_handler;
 
 	if (!tb[IFLA_LINK])
 		return -EINVAL;
@@ -3229,7 +3229,11 @@ static int macsec_newlink(struct net *net, struct net_device *dev,
 
 	if (data && data[IFLA_MACSEC_ICV_LEN])
 		icv_len = nla_get_u8(data[IFLA_MACSEC_ICV_LEN]);
-	dev->mtu = real_dev->mtu - icv_len - macsec_extra_len(true);
+	mtu = real_dev->mtu - icv_len - macsec_extra_len(true);
+	if (mtu < 0)
+		dev->mtu = 0;
+	else
+		dev->mtu = mtu;
 
 	rx_handler = rtnl_dereference(real_dev->rx_handler);
 	if (rx_handler && rx_handler != macsec_handle_frame)
-- 
2.20.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help