@@ -444,6 +444,8 @@ source "drivers/net/fddi/Kconfig"
 
 source "drivers/net/hippi/Kconfig"
 
+source "drivers/net/ipa/Kconfig"
+
 config NET_SB1000
 	tristate "General Instruments Surfboard 1000"
 	depends on PNP

@@ -47,6 +47,7 @@ obj-$(CONFIG_ETHERNET) += ethernet/
 obj-$(CONFIG_FDDI) += fddi/
 obj-$(CONFIG_HIPPI) += hippi/
 obj-$(CONFIG_HAMRADIO) += hamradio/
+obj-$(CONFIG_QCOM_IPA) += ipa/
 obj-$(CONFIG_PLIP) += plip/
 obj-$(CONFIG_PPP) += ppp/
 obj-$(CONFIG_PPP_ASYNC) += ppp/

@@ -0,0 +1,19 @@
+config QCOM_IPA
+	tristate "Qualcomm IPA support"
+	depends on ARCH_QCOM && 64BIT && NET
+	select QCOM_QMI_HELPERS
+	select QCOM_MDT_LOADER
+	default QCOM_Q6V5_COMMON
+	help
+	  Choose Y or M here to include support for the Qualcomm
+	  IP Accelerator (IPA), a hardware block present in some
+	  Qualcomm SoCs.  The IPA is a programmable protocol processor
+	  that is capable of generic hardware handling of IP packets,
+	  including routing, filtering, and NAT.  Currently the IPA
+	  driver supports only basic transport of network traffic
+	  between the AP and modem, on the Qualcomm SDM845 SoC.
+
+	  Note that if selected, the selection type must match that
+	  of QCOM_Q6V5_COMMON (Y or M).
+
+	  If unsure, say N.

@@ -0,0 +1,12 @@
+# Un-comment the next line if you want to validate configuration data
+#ccflags-y		+=	-DIPA_VALIDATE
+
+obj-$(CONFIG_QCOM_IPA)	+=	ipa.o
+
+ipa-y			:=	ipa_main.o ipa_clock.o ipa_reg.o ipa_mem.o \
+				ipa_table.o ipa_interrupt.o gsi.o gsi_trans.o \
+				ipa_gsi.o ipa_smp2p.o ipa_uc.o \
+				ipa_endpoint.o ipa_cmd.o ipa_modem.o \
+				ipa_qmi.o ipa_qmi_msg.o
+
+ipa-y			+=	ipa_data-sdm845.o ipa_data-sc7180.o