[PATCH v4 03/10] r8169: add PCI_STATUS_PARITY to PCI status error bits
From: Heiner Kallweit <hkallweit1@gmail.com>
Date: 2020-02-29 22:29:31
Also in:
linux-pci, lkml
Subsystem:
8169 10/100/1000 gigabit ethernet driver, networking drivers, the rest · Maintainers:
Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
In preparation of factoring out PCI_STATUS error bit handling let drivers use the same collection of error bits. To facilitate bisecting we do this in a separate patch per affected driver. For the r8169 driver we have to add PCI_STATUS_PARITY to the error bits. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- drivers/net/ethernet/realtek/r8169_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index f081007a2..7c9892a16 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c@@ -4381,7 +4381,7 @@ static void rtl8169_pcierr_interrupt(struct net_device *dev) pci_write_config_word(pdev, PCI_COMMAND, pci_cmd); pci_write_config_word(pdev, PCI_STATUS, - pci_status & (PCI_STATUS_DETECTED_PARITY | + pci_status & (PCI_STATUS_DETECTED_PARITY | PCI_STATUS_PARITY | PCI_STATUS_SIG_SYSTEM_ERROR | PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT | PCI_STATUS_SIG_TARGET_ABORT));
--
2.25.1