On Sun, Feb 23, 2020 at 12:47:40AM +0100, Christian Lamparter wrote:

quoted

+static int
+ipq8064_mdio_read(struct mii_bus *bus, int phy_addr, int reg_offset)
+{
+	struct ipq8064_mdio *priv = bus->priv;
+	u32 miiaddr = MII_BUSY | MII_CLKRANGE_250_300M;
+	u32 ret_val;
+	int err;
+
+	/* Reject clause 45 */
+	if (reg_offset & MII_ADDR_C45)
+		return -EOPNOTSUPP;

Heh, C45 on IPQ806X? Ok, anyone know the hardware or is this some fancy
forward-thinking future-proofing?

Quite simply, the driver as written does not support C45, so it should
reject it, rather than truncating the "reg_offset" and issuing C22
cycles instead.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up