[PATCH 5/6] net: bcmgenet: Fetch MAC address from the adapter
flat view
STALE2439d
REVIEWED: 1 (1M)
From: Jeremy Linton <hidden>
Date: 2020-02-01 07:46:43
Also in:
lkml
Subsystem:
broadcom genet ethernet driver, networking drivers, the rest · Maintainers:
Doug Berger, Florian Fainelli, Nicolai Buchwitz, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Revision v1 of 2 in this series; 1 review trailer.
Revisions (2)
- v1 current
- v2 [diff vs current]
ARM/ACPI machines should utilize self describing hardware when possible. The MAC address on the BCMGENET can be read from the adapter if a full featured firmware has already programmed it. Lets try using the address already programmed, if it appears to be valid. It should be noted that while we move the macaddr logic below the clock and power logic in the driver, none of that code will ever be active in an ACPI environment as the device will be attached to the acpi power domain, and brought to full power with all clocks enabled immediately before the device probe routine is called. Signed-off-by: Jeremy Linton <redacted> Acked-by: Florian Fainelli <f.fainelli@gmail.com> --- .../net/ethernet/broadcom/genet/bcmgenet.c | 43 ++++++++++++++----- 1 file changed, 32 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index c736700f829e..dbf96fc96689 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c@@ -2779,6 +2779,21 @@ static void bcmgenet_set_hw_addr(struct bcmgenet_priv *priv, bcmgenet_umac_writel(priv, (addr[4] << 8) | addr[5], UMAC_MAC1); } +static void bcmgenet_get_hw_addr(struct bcmgenet_priv *priv, + unsigned char *addr) +{ + u32 addr_tmp; + + addr_tmp = bcmgenet_umac_readl(priv, UMAC_MAC0); + addr[0] = addr_tmp >> 24; + addr[1] = (addr_tmp >> 16) & 0xff; + addr[2] = (addr_tmp >> 8) & 0xff; + addr[3] = addr_tmp & 0xff; + addr_tmp = bcmgenet_umac_readl(priv, UMAC_MAC1); + addr[4] = (addr_tmp >> 8) & 0xff; + addr[5] = addr_tmp & 0xff; +} + /* Returns a reusable dma control register value */ static u32 bcmgenet_dma_disable(struct bcmgenet_priv *priv) {
@@ -3509,11 +3524,6 @@ static int bcmgenet_probe(struct platform_device *pdev) } priv->wol_irq = platform_get_irq_optional(pdev, 2); - if (dn) - macaddr = of_get_mac_address(dn); - else if (pd) - macaddr = pd->mac_address; - priv->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(priv->base)) { err = PTR_ERR(priv->base);
@@ -3524,12 +3534,6 @@ static int bcmgenet_probe(struct platform_device *pdev) SET_NETDEV_DEV(dev, &pdev->dev); dev_set_drvdata(&pdev->dev, dev); - if (IS_ERR_OR_NULL(macaddr) || !is_valid_ether_addr(macaddr)) { - dev_warn(&pdev->dev, "using random Ethernet MAC\n"); - eth_hw_addr_random(dev); - } else { - ether_addr_copy(dev->dev_addr, macaddr); - } dev->watchdog_timeo = 2 * HZ; dev->ethtool_ops = &bcmgenet_ethtool_ops; dev->netdev_ops = &bcmgenet_netdev_ops;
@@ -3601,6 +3605,23 @@ static int bcmgenet_probe(struct platform_device *pdev) !strcasecmp(phy_mode_str, "internal")) bcmgenet_power_up(priv, GENET_POWER_PASSIVE); + if (dn) + macaddr = of_get_mac_address(dn); + else if (pd) + macaddr = pd->mac_address; + + if (IS_ERR_OR_NULL(macaddr) || !is_valid_ether_addr(macaddr)) { + if (has_acpi_companion(&pdev->dev)) + bcmgenet_get_hw_addr(priv, dev->dev_addr); + + if (!is_valid_ether_addr(dev->dev_addr)) { + dev_warn(&pdev->dev, "using random Ethernet MAC\n"); + eth_hw_addr_random(dev); + } + } else { + ether_addr_copy(dev->dev_addr, macaddr); + } + reset_umac(priv); err = bcmgenet_mii_init(dev);
--
2.24.1