[PATCH net v3 5/5] net: stmmac: update pci platform data to use phy_interface
From: Ong Boon Leong <hidden>
Date: 2020-01-22 09:10:45
Also in:
linux-arm-kernel, lkml
Subsystem:
networking drivers, stmmac ethernet driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Maxime Chevallier, Linus Torvalds
From: Voon Weifeng <redacted>
The recent patch to support passive mode converter did not take care the
phy interface configuration in PCI platform data. Hence, converting all
the PCI platform data from plat->interface to plat->phy_interface as the
default mode is meant for PHY.
Fixes: 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt")
Signed-off-by: Voon Weifeng <redacted>
Tested-by: Tan, Tee Min <redacted>
Signed-off-by: Ong Boon Leong <redacted>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
index 8237dbc3e991..d2bc04dedd7c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c@@ -96,7 +96,7 @@ static int stmmac_default_data(struct pci_dev *pdev, plat->bus_id = 1; plat->phy_addr = 0; - plat->interface = PHY_INTERFACE_MODE_GMII; + plat->phy_interface = PHY_INTERFACE_MODE_GMII; plat->dma_cfg->pbl = 32; plat->dma_cfg->pblx8 = true;
@@ -220,7 +220,8 @@ static int ehl_sgmii_data(struct pci_dev *pdev, { plat->bus_id = 1; plat->phy_addr = 0; - plat->interface = PHY_INTERFACE_MODE_SGMII; + plat->phy_interface = PHY_INTERFACE_MODE_SGMII; + return ehl_common_data(pdev, plat); }
@@ -233,7 +234,8 @@ static int ehl_rgmii_data(struct pci_dev *pdev, { plat->bus_id = 1; plat->phy_addr = 0; - plat->interface = PHY_INTERFACE_MODE_RGMII; + plat->phy_interface = PHY_INTERFACE_MODE_RGMII; + return ehl_common_data(pdev, plat); }
@@ -261,7 +263,7 @@ static int tgl_sgmii_data(struct pci_dev *pdev, { plat->bus_id = 1; plat->phy_addr = 0; - plat->interface = PHY_INTERFACE_MODE_SGMII; + plat->phy_interface = PHY_INTERFACE_MODE_SGMII; return tgl_common_data(pdev, plat); }
@@ -361,7 +363,7 @@ static int quark_default_data(struct pci_dev *pdev, plat->bus_id = pci_dev_id(pdev); plat->phy_addr = ret; - plat->interface = PHY_INTERFACE_MODE_RMII; + plat->phy_interface = PHY_INTERFACE_MODE_RMII; plat->dma_cfg->pbl = 16; plat->dma_cfg->pblx8 = true;
@@ -418,7 +420,7 @@ static int snps_gmac5_default_data(struct pci_dev *pdev, plat->bus_id = 1; plat->phy_addr = -1; - plat->interface = PHY_INTERFACE_MODE_GMII; + plat->phy_interface = PHY_INTERFACE_MODE_GMII; plat->dma_cfg->pbl = 32; plat->dma_cfg->pblx8 = true;
--
2.17.1