[PATCH AUTOSEL 5.4 104/205] rt2800: remove errornous duplicate condition

From: Daniel Golle <daniel@makrotopia.org>

[ Upstream commit a1f7c2cabf701a17b1a05d6526bbdadc3d05e05c ]

On 2019-10-28 06:07, wbob wrote:

Hello Roman,

while reading around drivers/net/wireless/ralink/rt2x00/rt2800lib.c
I stumbled on what I think is an edit of yours made in error in march
2017:

https://github.com/torvalds/linux/commit/41977e86#diff-dae5dc10da180f3b055809a48118e18aR5281

RT6352 in line 5281 should not have been introduced as the "else if"
below line 5291 can then not take effect for a RT6352 device. Another
possibility is for line 5291 to be not for RT6352, but this seems
very unlikely. Are you able to clarify still after this substantial time?

5277: static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
...
5279:  } else if (rt2x00_rt(rt2x00dev, RT5390) ||
5280:         rt2x00_rt(rt2x00dev, RT5392) ||
5281:         rt2x00_rt(rt2x00dev, RT6352)) {
...
5291:  } else if (rt2x00_rt(rt2x00dev, RT6352)) {
...

Hence remove errornous line 5281 to make the driver actually
execute the correct initialization routine for MT7620 chips.

As it was requested by Stanislaw Gruszka remove setting values of
MIMO_PS_CFG and TX_PIN_CFG. MIMO_PS_CFG is responsible for MIMO
power-safe mode (which is disabled), hence we can drop setting it.
TX_PIN_CFG is set correctly in other functions, and as setting this
value breaks some devices, rather don't set it here during init, but
only modify it later on.

Fixes: 41977e86c984 ("rt2x00: add support for MT7620")
Reported-by: wbob <redacted>
Reported-by: Roman Yeryomin <redacted>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Stanislaw Gruszka <redacted>
Signed-off-by: Kalle Valo <redacted>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index f1cdcd61c54a..c99f1912e266 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c

@@ -5839,8 +5839,7 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 		rt2800_register_write(rt2x00dev, TX_TXBF_CFG_0, 0x8000fc21);
 		rt2800_register_write(rt2x00dev, TX_TXBF_CFG_3, 0x00009c40);
 	} else if (rt2x00_rt(rt2x00dev, RT5390) ||
-		   rt2x00_rt(rt2x00dev, RT5392) ||
-		   rt2x00_rt(rt2x00dev, RT6352)) {
+		   rt2x00_rt(rt2x00dev, RT5392)) {
 		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
 		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
 		rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);

@@ -5854,8 +5853,6 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000401);
 		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0000);
 		rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
-		rt2800_register_write(rt2x00dev, MIMO_PS_CFG, 0x00000002);
-		rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0x00150F0F);
 		rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x00000000);
 		rt2800_register_write(rt2x00dev, TX0_BB_GAIN_ATTEN, 0x0);
 		rt2800_register_write(rt2x00dev, TX1_BB_GAIN_ATTEN, 0x0);

-- 
2.20.1