[PATCH 04/14] net: axienet: Improve DMA error handling
From: Andre Przywara <andre.przywara@arm.com>
Date: 2020-01-10 11:55:25
Also in:
linux-arm-kernel, lkml
Subsystem:
networking drivers, the rest, xilinx axi ethernet driver · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds, Radhey Shyam Pandey
Since 0 is a valid DMA address, we cannot use the physical address to check whether a TX descriptor is valid and is holding a DMA mapping. Use the "cntrl" member of the descriptor to make this decision, as it contains at least the length of the buffer, so 0 points to an uninitialised buffer. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 7e90044cf2d9..ec5d01adc1d5 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c@@ -570,7 +570,7 @@ static void axienet_start_xmit_done(struct net_device *ndev) DMA_TO_DEVICE); if (cur_p->skb) dev_consume_skb_irq(cur_p->skb); - /*cur_p->phys = 0;*/ + cur_p->cntrl = 0; cur_p->app0 = 0; cur_p->app1 = 0; cur_p->app2 = 0;
@@ -1557,7 +1557,7 @@ static void axienet_dma_err_handler(unsigned long data) for (i = 0; i < lp->tx_bd_num; i++) { cur_p = &lp->tx_bd_v[i]; - if (cur_p->phys) + if (cur_p->cntrl) dma_unmap_single(ndev->dev.parent, cur_p->phys, (cur_p->cntrl & XAXIDMA_BD_CTRL_LENGTH_MASK),
--
2.17.1