Hi Florian,

On Mon, 6 Jan 2020 at 21:35, Florian Fainelli [off-list ref] wrote:

On 1/5/20 5:34 PM, Vladimir Oltean wrote:

quoted

From: Claudiu Manoil <claudiu.manoil@nxp.com>

Within the LS1028A SoC, the register map for the ENETC MDIO controller
is instantiated a few times: for the central (external) MDIO controller,
for the internal bus of each standalone ENETC port, and for the internal
bus of the Felix switch.

Refactoring is needed to support multiple MDIO buses from multiple
drivers. The enetc_hw structure is made an opaque type and a smaller
enetc_mdio_priv is created.

'mdio_base' - MDIO registers base address - is being parameterized, to
be able to work with different MDIO register bases.

The ENETC MDIO bus operations are exported from the fsl-enetc-mdio
kernel object, the same that registers the central MDIO controller (the
dedicated PF). The ENETC main driver has been changed to select it, and
use its exported helpers to further register its private MDIO bus. The
DSA Felix driver will do the same.

This series has already been applied so this may be food for thought at
this point, but why was not the solution to create a standalone mii_bus
driver and have all consumers be pointed it?

I have no real opinion on this.

To be honest, the reason is that the existing "culture" of Freescale
MDIO drivers wasn't to put them in drivers/net/phy/mdio-*.c, and I
just didn't look past the fence.

But what is the benefit? What gets passed between bcmgenet and
mdio-bcm-unimac with struct bcmgenet_platform_data is equivalent with
what gets passed between vsc9959 and enetc_mdio with the manual
population of struct mii_bus and struct enetc_mdio_priv, no? I'm not
even sure there is a net reduction in code size. And I am not really
sure that I want an of_node for the MDIO bus platform device anyway.
Whereas genet seems to be instantiating a port-private MDIO bus for
the _real_ (but nonetheless embedded) PHY, the MDIO bus we have here
is for the MAC PCS, which is more akin to the custom device tree
binding "pcsphy-handle" that the DPAA1 driver is using (see
arch/arm64/boot/dts/qoriq-fman3-0-10g-0.dtsi for example). So there is
no requirement to run the PHY state machine on it, it's just locally
driven, so I don't want to add a dependency on device tree where it's
really not needed. (By the way I am further confused by the
undocumented/unused "brcm,40nm-ephy" compatible string that these
device tree bindings for genet have).

It is not uncommon for MDIO controllers to be re-used and integrated
within a larger block and when that happens whoever owns the largest
address space, say the Ethernet MAC can request the large resource
region and the MDIO bus controler can work on that premise, that's what
we did with genet/bcmmii.c and mdio-bcm-unimac.c for instance (so we
only do an ioremap, not request_mem_region + ioremap).

I don't really understand this. In arch/mips/boot/dts, for all of
bcm73xx and bcm74xx SoCs, you have a single Ethernet port DT node, and
a single MDIO bus as a child beneath it, where is this reuse that you
mention?
And because I don't really understand what you've said, my following
comment maybe makes no sense, but I think what you mean by "MDIO
controller reuse" is that there are multiple instantiations of the
register map, but ultimately every transaction ends up on the same
MDIO/MDC pair of wires and the same electrical bus.
We do have some of that with the ENETC, but not with the switch, whose
internal MDIO bus has no connection to the outside world, it just
holds the PCS front-ends for the SerDes.
I also don't understand the reference to request_mem_region, perhaps
it would help if you could show some code.

Your commit message does not provide a justification for why this
abstraction (mii_bus) was not suitable or considered here. Do you think
that could be changed?

I'm sorry, was the mii_bus abstraction really not considered here?
Based on the stuff exported in this patch, an mii_bus is exactly what
I'm registering in 9/9, no?

Thanks!
--
Florian

Regards,
-Vladimir