[PATCH AUTOSEL 4.19 51/84] bonding: fix active-backup transition after link failure

From: Mahesh Bandewar <redacted>

[ Upstream commit 5d485ed88d48f8101a2067348e267c0aaf4ed486 ]

After the recent fix in commit 1899bb325149 ("bonding: fix state
transition issue in link monitoring"), the active-backup mode with
miimon initially come-up fine but after a link-failure, both members
transition into backup state.

Following steps to reproduce the scenario (eth1 and eth2 are the
slaves of the bond):

    ip link set eth1 up
    ip link set eth2 down
    sleep 1
    ip link set eth2 up
    ip link set eth1 down
    cat /sys/class/net/eth1/bonding_slave/state
    cat /sys/class/net/eth2/bonding_slave/state

Fixes: 1899bb325149 ("bonding: fix state transition issue in link monitoring")
CC: Jay Vosburgh <redacted>
Signed-off-by: Mahesh Bandewar <redacted>
Acked-by: Jay Vosburgh <redacted>
Signed-off-by: Jakub Kicinski <redacted>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/bonding/bond_main.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 9b8143dca512..f57b86f1373d 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c

@@ -2223,9 +2223,6 @@ static void bond_miimon_commit(struct bonding *bond)
 			} else if (BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) {
 				/* make it immediately active */
 				bond_set_active_slave(slave);
-			} else if (slave != primary) {
-				/* prevent it from being the active one */
-				bond_set_backup_slave(slave);
 			}
 
 			netdev_info(bond->dev, "link status definitely up for interface %s, %u Mbps %s duplex\n",

-- 
2.20.1