[PATCH AUTOSEL 4.14 126/150] net: dsa: bcm_sf2: Turn on PHY to allow successful registration
From: Sasha Levin <sashal@kernel.org>
Date: 2019-11-16 16:07:26
Also in:
lkml, stable
Subsystem:
broadcom b53/sf2 ethernet switch driver, networking drivers, networking [dsa], the rest · Maintainers:
Florian Fainelli, Jonas Gorski, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Vladimir Oltean, Linus Torvalds
From: Florian Fainelli <f.fainelli@gmail.com> [ Upstream commit c04a17d2a9ccf1eaba1c5a56f83e997540a70556 ] We are binding to the PHY using the SF2 slave MDIO bus that we create, binding involves reading the PHY's MII_PHYSID1/2 which won't be possible if the PHY is turned off. Temporarily turn it on/off for the bus probing to succeeed. This fixes unbind/bind problems where the port connecting to that PHY would be in error since it could not connect to it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> --- drivers/net/dsa/bcm_sf2.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 604c5abc08eb8..af666951a9592 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c@@ -1196,12 +1196,16 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev) return ret; } + bcm_sf2_gphy_enable_set(priv->dev->ds, true); + ret = bcm_sf2_mdio_register(ds); if (ret) { pr_err("failed to register MDIO bus\n"); return ret; } + bcm_sf2_gphy_enable_set(priv->dev->ds, false); + ret = bcm_sf2_cfp_rst(priv); if (ret) { pr_err("failed to reset CFP\n");
--
2.20.1