[PATCH net-next 1/7] net: stmmac: Do not set RX IC bit if RX Coalesce is zero

We may only want to use the RX Watchdog so lets check if RX Coalesce
settings are non-zero and only set the RX Interrupt on Completion bit if
its not.

Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>

---
Cc: Giuseppe Cavallaro <redacted>
Cc: Alexandre Torgue <redacted>
Cc: Jose Abreu <redacted>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 39b4efd521f9..e3677883ea30 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -3440,7 +3440,8 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv, u32 queue)
 		rx_q->rx_count_frames += priv->rx_coal_frames;
 		if (rx_q->rx_count_frames > priv->rx_coal_frames)
 			rx_q->rx_count_frames = 0;
-		use_rx_wd = priv->use_riwt && rx_q->rx_count_frames;
+		use_rx_wd = !priv->rx_coal_frames;
+		use_rx_wd |= priv->use_riwt && rx_q->rx_count_frames;
 
 		dma_wmb();
 		stmmac_set_rx_owner(priv, p, use_rx_wd);

-- 
2.7.4