Re: [PATCH v2 01/11] Documentation: dt: wireless: update wl1251 for sdio
From: Rob Herring <robh@kernel.org>
Date: 2019-10-25 21:13:42
Also in:
linux-arm-kernel, linux-devicetree, linux-mmc, linux-omap, linux-wireless, lkml
On Sat, Oct 19, 2019 at 08:41:16PM +0200, H. Nikolaus Schaller wrote:
quoted hunk ↗ jump to hunk
The standard method for sdio devices connected to an sdio interface is to define them as a child node like we can see with wlcore. Signed-off-by: H. Nikolaus Schaller <redacted> Acked-by: Kalle Valo <redacted> --- .../bindings/net/wireless/ti,wl1251.txt | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+)diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt index bb2fcde6f7ff..88612ff29f2d 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt +++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt@@ -35,3 +35,29 @@ Examples: ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */ }; }; + +&mmc3 { + vmmc-supply = <&wlan_en>; + + bus-width = <4>; + non-removable; + ti,non-removable; + cap-power-off-card; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins>;
None of the above are really relevant to this binding.
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wlan: wl1251@1 {wifi@1
+ compatible = "ti,wl1251"; + + reg = <1>; + + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_21 */ + + ti,wl1251-has-eeprom; + }; +}; -- 2.19.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel