[PATCH v2] [trivial] net: Fix misspellings of "configure" and "configuration"
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: 2019-10-24 15:22:11
Also in:
linux-rdma, linux-wireless, lkml
Subsystem:
atheros ath generic utilities, intel wireless wifi link (iwlwifi), mellanox mlx5 core vpi driver, networking drivers, qlogic ql4xxx ethernet driver, qualcomm atheros ath9k wireless driver, the rest, ti wilink wireless drivers · Maintainers:
Jeff Johnson, Miri Korenblit, Saeed Mahameed, Leon Romanovsky, Tariq Toukan, Mark Bloch, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Toke Høiland-Jørgensen, Linus Torvalds
Fix various misspellings of "configuration" and "configure".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
- Merge
[trivial] net/mlx5e: Spelling s/configuraiton/configuration/
[trivial] qed: Spelling s/configuraiton/configuration/
- Fix typo in subject,
- Extend with various other similar misspellings.
---
drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c | 2 +-
drivers/net/ethernet/qlogic/qed/qed_int.h | 4 ++--
drivers/net/ethernet/qlogic/qed/qed_sriov.h | 2 +-
drivers/net/ethernet/qlogic/qede/qede_filter.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_hw.c | 2 +-
drivers/net/wireless/intel/iwlwifi/iwl-fh.h | 2 +-
drivers/net/wireless/ti/wlcore/spi.c | 2 +-
include/uapi/linux/dcbnl.h | 2 +-
8 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c b/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c
index 633b117eb13e8143..7b672ada63a39733 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c@@ -175,7 +175,7 @@ static int update_xoff_threshold(struct mlx5e_port_buffer *port_buffer, * @port_buffer: <output> port receive buffer configuration * @change: <output> * - * Update buffer configuration based on pfc configuraiton and + * Update buffer configuration based on pfc configuration and * priority to buffer mapping. * Buffer's lossy bit is changed to: * lossless if there is at least one PFC enabled priority
diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.h b/drivers/net/ethernet/qlogic/qed/qed_int.h
index d473b522afc5137f..9ad568d93ae6501c 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_int.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_int.h@@ -37,14 +37,14 @@ #include <linux/slab.h> #include "qed.h" -/* Fields of IGU PF CONFIGRATION REGISTER */ +/* Fields of IGU PF CONFIGURATION REGISTER */ #define IGU_PF_CONF_FUNC_EN (0x1 << 0) /* function enable */ #define IGU_PF_CONF_MSI_MSIX_EN (0x1 << 1) /* MSI/MSIX enable */ #define IGU_PF_CONF_INT_LINE_EN (0x1 << 2) /* INT enable */ #define IGU_PF_CONF_ATTN_BIT_EN (0x1 << 3) /* attention enable */ #define IGU_PF_CONF_SINGLE_ISR_EN (0x1 << 4) /* single ISR mode enable */ #define IGU_PF_CONF_SIMD_MODE (0x1 << 5) /* simd all ones mode */ -/* Fields of IGU VF CONFIGRATION REGISTER */ +/* Fields of IGU VF CONFIGURATION REGISTER */ #define IGU_VF_CONF_FUNC_EN (0x1 << 0) /* function enable */ #define IGU_VF_CONF_MSI_MSIX_EN (0x1 << 1) /* MSI/MSIX enable */ #define IGU_VF_CONF_SINGLE_ISR_EN (0x1 << 4) /* single ISR mode enable */
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.h b/drivers/net/ethernet/qlogic/qed/qed_sriov.h
index 9a8fd79611f24909..368e88565783bb50 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.h@@ -305,7 +305,7 @@ void qed_iov_bulletin_set_udp_ports(struct qed_hwfn *p_hwfn, /** * @brief Read sriov related information and allocated resources - * reads from configuraiton space, shmem, etc. + * reads from configuration space, shmem, etc. * * @param p_hwfn *
diff --git a/drivers/net/ethernet/qlogic/qede/qede_filter.c b/drivers/net/ethernet/qlogic/qede/qede_filter.c
index 9a6a9a008714659a..d6cfe4ffbaf3d883 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_filter.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_filter.c@@ -1298,7 +1298,7 @@ void qede_config_rx_mode(struct net_device *ndev) rx_mode.type = QED_FILTER_TYPE_RX_MODE; /* Remove all previous unicast secondary macs and multicast macs - * (configrue / leave the primary mac) + * (configure / leave the primary mac) */ rc = qede_set_ucast_rx_mac(edev, QED_FILTER_XCAST_TYPE_REPLACE, edev->ndev->dev_addr);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
index 2fe12b0de5b4f2a4..42f00a2a8c8007d2 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c@@ -1037,7 +1037,7 @@ static void ar9003_hw_configpcipowersave(struct ath_hw *ah, } /* - * Configire PCIE after Ini init. SERDES values now come from ini file + * Configure PCIE after Ini init. SERDES values now come from ini file * This enables PCIe low power mode. */ array = power_off ? &ah->iniPcieSerdes :
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-fh.h b/drivers/net/wireless/intel/iwlwifi/iwl-fh.h
index 0c12df5582409db3..05c1c77c88a0f738 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-fh.h
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-fh.h@@ -148,7 +148,7 @@ static inline unsigned int FH_MEM_CBBC_QUEUE(struct iwl_trans *trans, * * Bits 3:0: * Define the maximum number of pending read requests. - * Maximum configration value allowed is 0xC + * Maximum configuration value allowed is 0xC * Bits 9:8: * Define the maximum transfer size. (64 / 128 / 256) * Bit 10:
diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c
index d4c09e54fd634d61..18c4d998ce4b92e6 100644
--- a/drivers/net/wireless/ti/wlcore/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c@@ -186,7 +186,7 @@ static void wl12xx_spi_init(struct device *child) spi_sync(to_spi_device(glue->dev), &m); - /* Restore chip select configration to normal */ + /* Restore chip select configuration to normal */ spi->mode ^= SPI_CS_HIGH; kfree(cmd); }
diff --git a/include/uapi/linux/dcbnl.h b/include/uapi/linux/dcbnl.h
index 69df19aa8e728909..a791a94013a69a61 100644
--- a/include/uapi/linux/dcbnl.h
+++ b/include/uapi/linux/dcbnl.h@@ -286,7 +286,7 @@ struct dcbmsg { * @DCB_CMD_GNUMTCS: get the number of traffic classes currently supported * @DCB_CMD_SNUMTCS: set the number of traffic classes * @DCB_CMD_GBCN: set backward congestion notification configuration - * @DCB_CMD_SBCN: get backward congestion notification configration. + * @DCB_CMD_SBCN: get backward congestion notification configuration. * @DCB_CMD_GAPP: get application protocol configuration * @DCB_CMD_SAPP: set application protocol configuration * @DCB_CMD_IEEE_SET: set IEEE 802.1Qaz configuration
--
2.17.1