[PATCH net,v3 1/2] net: ethernet: mediatek: Fix MT7629 missing GMII mode support
From: MarkLee <hidden>
Date: 2019-10-14 07:15:27
Also in:
linux-arm-kernel, linux-devicetree, linux-mediatek, lkml
Subsystem:
mediatek ethernet driver, networking drivers, the rest · Maintainers:
Felix Fietkau, Lorenzo Bianconi, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
In the original design, mtk_phy_connect function will set ge_mode=1
if phy-mode is GMII(PHY_INTERFACE_MODE_GMII) and then set the correct
ge_mode to ETHSYS_SYSCFG0 register. This logic was broken after apply
mediatek PHYLINK patch(Fixes tag), the new mtk_mac_config function will
not set ge_mode=1 for GMII mode hence the final ETHSYS_SYSCFG0 setting
will be incorrect for mt7629 GMII mode. This patch add the missing logic
back to fix it.
Fixes: b8fc9f30821e ("net: ethernet: mediatek: Add basic PHYLINK support")
Signed-off-by: MarkLee <redacted>
--
v2->v3:
* no change
v1->v2:
* no change
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index c61069340f4f..703adb96429e 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c@@ -261,6 +261,7 @@ static void mtk_mac_config(struct phylink_config *config, unsigned int mode, ge_mode = 0; switch (state->interface) { case PHY_INTERFACE_MODE_MII: + case PHY_INTERFACE_MODE_GMII: ge_mode = 1; break; case PHY_INTERFACE_MODE_REVMII:
--
2.17.1