From: Navid Emamdoost <redacted>
In sja1105_static_config_upload, in two cases memory is leaked: when
static_config_buf_prepare_for_upload fails and when sja1105_inhibit_tx
fails. In both cases config_buf should be released.
Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch")
Fixes: 1a4c69406cc1 ("net: dsa: sja1105: Prevent PHY jabbering during switch reset")
Signed-off-by: Navid Emamdoost <redacted>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
---
Changes since v3:
I took over the patch and fixed formatting.
drivers/net/dsa/sja1105/sja1105_spi.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/sja1105/sja1105_spi.c b/drivers/net/dsa/sja1105/sja1105_spi.c
index 84dc603138cf..58dd37ecde17 100644
--- a/drivers/net/dsa/sja1105/sja1105_spi.c
+++ b/drivers/net/dsa/sja1105/sja1105_spi.c
@@ -409,7 +409,8 @@ int sja1105_static_config_upload(struct sja1105_private *priv)
rc = static_config_buf_prepare_for_upload(priv, config_buf, buf_len);
if (rc < 0) {
dev_err(dev, "Invalid config, cannot upload\n");
- return -EINVAL;
+ rc = -EINVAL;
+ goto out;
}
/* Prevent PHY jabbering during switch reset by inhibiting
* Tx on all ports and waiting for current packet to drain.@@ -418,7 +419,8 @@ int sja1105_static_config_upload(struct sja1105_private *priv)
rc = sja1105_inhibit_tx(priv, port_bitmap, true);
if (rc < 0) {
dev_err(dev, "Failed to inhibit Tx on ports\n");
- return -ENXIO;
+ rc = -ENXIO;
+ goto out;
}
/* Wait for an eventual egress packet to finish transmission
* (reach IFG). It is guaranteed that a second one will not--
2.17.1