Re: [PATCH v5 2/4] net: phy: Add support for generic LED configuration through the DT

+static void of_phy_config_leds(struct phy_device *phydev)
+{
+	struct device_node *np, *child;
+	struct phy_led_config cfg;
+	const char *trigger;
+	int ret;
+
+	if (!IS_ENABLED(CONFIG_OF_MDIO) || !phydev->drv->config_led)
+		return;
+
+	np = of_find_node_by_name(phydev->mdio.dev.of_node, "leds");
+	if (!np)
+		return;
+
+	for_each_child_of_node(np, child) {
+		u32 led;
+
+		if (of_property_read_u32(child, "reg", &led))
+			goto skip_config;
+
+		ret = of_property_read_string(child, "linux,default-trigger",
+					      &trigger);
+		if (ret)
+			trigger = "none";
+
+		memset(&cfg, 0, sizeof(cfg));
+
+		if (!strcmp(trigger, "none")) {
+			cfg.trigger.t = PHY_LED_TRIGGER_NONE;
+		} else if (!strcmp(trigger, "phy-link")) {
+			cfg.trigger.t = PHY_LED_TRIGGER_LINK;
+		} else if (!strcmp(trigger, "phy-link-10m")) {
+			cfg.trigger.t = PHY_LED_TRIGGER_LINK_10M;
+		} else if (!strcmp(trigger, "phy-link-100m")) {
+			cfg.trigger.t = PHY_LED_TRIGGER_LINK_100M;
+		} else if (!strcmp(trigger, "phy-link-1g")) {
+			cfg.trigger.t = PHY_LED_TRIGGER_LINK_1G;
+		} else if (!strcmp(trigger, "phy-link-10g")) {
+			cfg.trigger.t = PHY_LED_TRIGGER_LINK_10G;
+		} else if (!strcmp(trigger, "phy-link-activity")) {
+			cfg.trigger.t = PHY_LED_TRIGGER_LINK;
+			cfg.trigger.activity = true;
+		} else if (!strcmp(trigger, "phy-link-10m-activity")) {
+			cfg.trigger.t = PHY_LED_TRIGGER_LINK_10M;
+			cfg.trigger.activity = true;
+		} else if (!strcmp(trigger, "phy-link-100m-activity")) {
+			cfg.trigger.t = PHY_LED_TRIGGER_LINK_100M;
+			cfg.trigger.activity = true;
+		} else if (!strcmp(trigger, "phy-link-1g-activity")) {
+			cfg.trigger.t = PHY_LED_TRIGGER_LINK_1G;
+			cfg.trigger.activity = true;
+		} else if (!strcmp(trigger, "phy-link-10g-activity")) {
+			cfg.trigger.t = PHY_LED_TRIGGER_LINK_10G;
+			cfg.trigger.activity = true;
+		} else {
+			phydev_warn(phydev, "trigger '%s' for LED%d is invalid\n",
+				    trigger, led);
+			goto skip_config;
+		}
+
+		phydev->drv->config_led(phydev, led, &cfg);

We should not ignore the return value. I expect drivers will return
-EINVAL, or EOPNOTSUPP if asked to configure an LED in a way they
don't support. We need to report this. So i would add a phydev_warn:

+			phydev_warn(phydev, "trigger '%s' for LED%d not supported\n",
+				    trigger, led);

  Andrew