[PATCH net-next v2 1/4] dt-bindings: net: Add aspeed,ast2600-mdio binding
From: Andrew Jeffery <hidden>
Date: 2019-07-31 05:40:03
Also in:
linux-arm-kernel, linux-aspeed, linux-devicetree, lkml
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The AST2600 splits out the MDIO bus controller from the MAC into its own IP block and rearranges the register layout. Add a new binding to describe the new hardware. Signed-off-by: Andrew Jeffery <redacted> --- v2: * aspeed: Utilise mdio.yaml * aspeed: Drop status from example --- .../bindings/net/aspeed,ast2600-mdio.yaml | 45 +++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
diff --git a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
new file mode 100644
index 000000000000..71808e78a495
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml@@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/aspeed,ast2600-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED AST2600 MDIO Controller + +maintainers: + - Andrew Jeffery <andrew@aj.id.au> + +description: |+ + The ASPEED AST2600 MDIO controller is the third iteration of ASPEED's MDIO + bus register interface, this time also separating out the controller from the + MAC. + +allOf: + - $ref: "mdio.yaml#" + +properties: + compatible: + const: aspeed,ast2600-mdio + reg: + maxItems: 1 + description: The register range of the MDIO controller instance + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +examples: + - | + mdio0: mdio@1e650000 { + compatible = "aspeed,ast2600-mdio"; + reg = <0x1e650000 0x8>; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + };
--
2.20.1