@@ -0,0 +1,389 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/snps,dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare MAC Device Tree Bindings
+
+maintainers:
+ - Alexandre Torgue <alexandre.torgue@st.com>
+ - Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ - Jose Abreu <joabreu@synopsys.com>
+
+# Select every compatible, including the deprecated ones. This way, we
+# will be able to report a warning when we have that compatible, since
+# we will validate the node thanks to the select, but won't report it
+# as a valid value in the compatible property description
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - snps,dwmac
+ - snps,dwmac-3.50a
+ - snps,dwmac-3.610
+ - snps,dwmac-3.70a
+ - snps,dwmac-3.710
+ - snps,dwmac-4.00
+ - snps,dwmac-4.10a
+ - snps,dwxgmac
+ - snps,dwxgmac-2.10
+
+ # Deprecated
+ - st,spear600-gmac
+
+ required:
+ - compatible
+
+properties:
+
+ # We need to include all the compatibles from schemas that will
+ # include that schemas, otherwise compatible won't validate for
+ # those.
+ compatible:
+ contains:
+ enum:
+ - snps,dwmac
+ - snps,dwmac-3.50a
+ - snps,dwmac-3.610
+ - snps,dwmac-3.70a
+ - snps,dwmac-3.710
+ - snps,dwmac-4.00
+ - snps,dwmac-4.10a
+ - snps,dwxgmac
+ - snps,dwxgmac-2.10
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 3
+ items:
+ - description: Combined signal for various interrupt events
+ - description: The interrupt to manage the remote wake-up packet detection
+ - description: The interrupt that occurs when Rx exits the LPI state
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 3
+ items:
+ - const: macirq
+ - const: eth_wake_irq
+ - const: eth_lpi
+
+ clocks:
+ minItems: 1
+ maxItems: 3
+ items:
+ - description: GMAC main clock
+ - description: Peripheral registers interface clock
+ - description:
+ PTP reference clock. This clock is used for programming the
+ Timestamp Addend Register. If not passed then the system
+ clock will be used and this is fine on some platforms.
+
+ clock-names:
+ additionalItems: true
+ contains:
+ enum:
+ - stmmaceth
+ - pclk
+ - ptp_ref
+
+ resets:
+ maxItems: 1
+ description:
+ MAC Reset signal.
+
+ reset-names:
+ const: stmmaceth
+
+ snps,axi-config:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ AXI BUS Mode parameters. Phandle to a node that can contain the
+ following properties
+ * snps,lpi_en, enable Low Power Interface
+ * snps,xit_frm, unlock on WoL
+ * snps,wr_osr_lmt, max write outstanding req. limit
+ * snps,rd_osr_lmt, max read outstanding req. limit
+ * snps,kbbe, do not cross 1KiB boundary.
+ * snps,blen, this is a vector of supported burst length.
+ * snps,fb, fixed-burst
+ * snps,mb, mixed-burst
+ * snps,rb, rebuild INCRx Burst
+
+ snps,mtl-rx-config:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ Multiple RX Queues parameters. Phandle to a node that can
+ contain the following properties
+ * snps,rx-queues-to-use, number of RX queues to be used in the
+ driver
+ * Choose one of these RX scheduling algorithms
+ * snps,rx-sched-sp, Strict priority
+ * snps,rx-sched-wsp, Weighted Strict priority
+ * For each RX queue
+ * Choose one of these modes
+ * snps,dcb-algorithm, Queue to be enabled as DCB
+ * snps,avb-algorithm, Queue to be enabled as AVB
+ * snps,map-to-dma-channel, Channel to map
+ * Specifiy specific packet routing
+ * snps,route-avcp, AV Untagged Control packets
+ * snps,route-ptp, PTP Packets
+ * snps,route-dcbcp, DCB Control Packets
+ * snps,route-up, Untagged Packets
+ * snps,route-multi-broad, Multicast & Broadcast Packets
+ * snps,priority, RX queue priority (Range 0x0 to 0xF)
+
+ snps,mtl-tx-config:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ Multiple TX Queues parameters. Phandle to a node that can
+ contain the following properties
+ * snps,tx-queues-to-use, number of TX queues to be used in the
+ driver
+ * Choose one of these TX scheduling algorithms
+ * snps,tx-sched-wrr, Weighted Round Robin
+ * snps,tx-sched-wfq, Weighted Fair Queuing
+ * snps,tx-sched-dwrr, Deficit Weighted Round Robin
+ * snps,tx-sched-sp, Strict priority
+ * For each TX queue
+ * snps,weight, TX queue weight (if using a DCB weight
+ algorithm)
+ * Choose one of these modes
+ * snps,dcb-algorithm, TX queue will be working in DCB
+ * snps,avb-algorithm, TX queue will be working in AVB
+ [Attention] Queue 0 is reserved for legacy traffic
+ and so no AVB is available in this queue.
+ * Configure Credit Base Shaper (if AVB Mode selected)
+ * snps,send_slope, enable Low Power Interface
+ * snps,idle_slope, unlock on WoL
+ * snps,high_credit, max write outstanding req. limit
+ * snps,low_credit, max read outstanding req. limit
+ * snps,priority, TX queue priority (Range 0x0 to 0xF)
+
+ snps,reset-gpio:
+ maxItems: 1
+ description:
+ PHY Reset GPIO
+
+ snps,reset-active-low:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Indicates that the PHY Reset is active low
+
+ snps,reset-delays-us:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint32-array
+ - minItems: 3
+ maxItems: 3
+ description:
+ Triplet of delays. The 1st cell is reset pre-delay in micro
+ seconds. The 2nd cell is reset pulse in micro seconds. The 3rd
+ cell is reset post-delay in micro seconds.
+
+ snps,aal:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Use Address-Aligned Beats
+
+ snps,fixed-burst:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Program the DMA to use the fixed burst mode
+
+ snps,mixed-burst:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Program the DMA to use the mixed burst mode
+
+ snps,force_thresh_dma_mode:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Force DMA to use the threshold mode for both tx and rx
+
+ snps,force_sf_dma_mode:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Force DMA to use the Store and Forward mode for both tx and
+ rx. This flag is ignored if force_thresh_dma_mode is set.
+
+ snps,en-tx-lpi-clockgating:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Enable gating of the MAC TX clock during TX low-power mode
+
+ snps,multicast-filter-bins:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ Number of multicast filter hash bins supported by this device
+ instance
+
+ snps,perfect-filter-entries:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ Number of perfect filter entries supported by this device
+ instance
+
+ snps,ps-speed:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ Port selection speed that can be passed to the core when PCS
+ is supported. For example, this is used in case of SGMII and
+ MAC2MAC connection.
+
+ mdio:
+ type: object
+ description:
+ Creates and registers an MDIO bus.
+
+ properties:
+ compatible:
+ const: snps,dwmac-mdio
+
+ required:
+ - compatible
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - phy-mode
+
+dependencies:
+ snps,reset-active-low: ["snps,reset-gpio"]
+ snps,reset-delay-us: ["snps,reset-gpio"]
+
+allOf:
+ - $ref: "ethernet-controller.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - snps,dwxgmac
+ - snps,dwxgmac-2.10
+ - st,spear600-gmac
+
+ then:
+ properties:
+ snps,pbl:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint32-array
+ - enum: [2, 4, 8]