[PATCH v7 4/6] dt-bindings: display: hdmi-connector: Support DDC bus enable
From: <hidden>
Date: 2019-06-20 13:47:57
Also in:
dri-devel, linux-arm-kernel, linux-devicetree, lkml
Subsystem:
drm drivers, drm drivers and misc gpu patches, open firmware and flattened device tree bindings, the rest · Maintainers:
David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
From: Ondrej Jirman <redacted> Some Allwinner SoC using boards (Orange Pi 3 for example) need to enable on-board voltage shifting logic for the DDC bus using a gpio to be able to access DDC bus. Use ddc-en-gpios property on the hdmi-connector to model this. Add binding documentation for optional ddc-en-gpios property. Signed-off-by: Ondrej Jirman <redacted> Reviewed-by: Rob Herring <robh@kernel.org> --- .../devicetree/bindings/display/connector/hdmi-connector.txt | 1 + 1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt b/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt
index 508aee461e0d..aeb07c4bd703 100644
--- a/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt
+++ b/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt@@ -9,6 +9,7 @@ Optional properties: - label: a symbolic name for the connector - hpd-gpios: HPD GPIO number - ddc-i2c-bus: phandle link to the I2C controller used for DDC EDID probing +- ddc-en-gpios: signal to enable DDC bus Required nodes: - Video port for HDMI input
--
2.22.0