Thread (1 message) 1 message, 1 author, 2019-06-16
DORMANTno replies

[PATCH 6/6] net: macb: parameter added to cadence ethernet controller DT binding

From: Parshuram Thombare <hidden>
Date: 2019-06-16 07:05:49
Also in: lkml
Subsystem: networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers: Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

Possibly related (same subject, not in this thread)

New parameters added to Cadence ethernet controller DT binding
for USXGMII interface.

Signed-off-by: Parshuram Thombare <redacted>
---
 Documentation/devicetree/bindings/net/macb.txt | 4 ++++
 1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
index 9c5e94482b5f..cd79ec9dddfb 100644
--- a/Documentation/devicetree/bindings/net/macb.txt
+++ b/Documentation/devicetree/bindings/net/macb.txt
@@ -25,6 +25,10 @@ Required properties:
 	Optional elements: 'rx_clk' applies to cdns,zynqmp-gem
 	Optional elements: 'tsu_clk'
 - clocks: Phandles to input clocks.
+- serdes-rate External serdes rate.Mandatory for USXGMII mode.
+	0 - 5G
+	1 - 10G
+- fixed-speed Speed for fixed mode UXSGMII interface based link
 
 The MAC address will be determined using the optional properties
 defined in ethernet.txt.
-- 
2.17.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help