RE: [PATCH 0/6] net: macb patch set cover letter

Hi All,

Please ignore patches sent in-reply chain to patch 0001.
Sending all patches in reply to patch 0000-cover-letter.patch.

Regards,
Parshuram Thombare

-----Original Message-----
From: Parshuram Thombare <redacted>
Sent: Sunday, June 16, 2019 5:15 AM
To: andrew@lunn.ch; nicolas.ferre@microchip.com; davem@davemloft.net;
f.fainelli@gmail.com
Cc: netdev@vger.kernel.org; hkallweit1@gmail.com; linux-
kernel@vger.kernel.org; Rafal Ciepiela [off-list ref]; Anil Joy
Varughese [off-list ref]; Piotr Sroka [off-list ref];
Parshuram Raju Thombare [off-list ref]
Subject: [PATCH 0/6] net: macb patch set cover letter

Hello !,

This is second version of patch set containing following patches for Cadence
ethernet controller driver.

1. 0001-net-macb-add-phylink-support.patch
  Replace phylib API's with phylink API's.
2. 0002-net-macb-add-support-for-sgmii-MAC-PHY-interface.patch
  This patch add support for SGMII mode.
3. 003-net-macb-add-PHY-configuration-in-MACB-PCI-wrapper.patch
  This patch is to configure TI PHY DP83867 in SGMII mode from
  our MAC PCI wrapper driver.
  With this change there is no need of PHY driver and dp83867
  module must be disabled. Users wanting to setup DP83867 PHY
  in SGMII mode can disable dp83867.ko driver, else dp83867.ko
  overwrite this configuration and PHY is setup as per dp83867.ko.
4. 0004-net-macb-add-support-for-c45-PHY.patch
  This patch is to support C45 PHY.
5. 0005-net-macb-add-support-for-high-speed-interface
  This patch add support for 10G USXGMII PCS in fixed mode.
  Since emulated PHY used in fixed mode doesn't seems to
  support anything above 1G, additional parameter is used outside
  "fixed-link" node for selecting speed and "fixed-link"
  node speed is still set at 1G.
6. 0006-net-macb-parameter-added-to-cadence-ethernet-controller-DT-binding
  New parameters added to Cadence ethernet controller DT binding
  for USXGMII interface.

Regards,
Parshuram Thombare

Parshuram Thombare (6):
 net: macb: add phylink support
 net: macb: add support for sgmii MAC-PHY interface
 net: macb: add PHY configuration in MACB PCI wrapper
 net: macb: add support for c45 PHY
 net: macb: add support for high speed interface
 net: macb: parameter added to cadence ethernet controller DT binding

.../devicetree/bindings/net/macb.txt          |   4 +
drivers/net/ethernet/cadence/Kconfig          |   2 +-
drivers/net/ethernet/cadence/macb.h           | 136 +++-
drivers/net/ethernet/cadence/macb_main.c      | 659 ++++++++++++++----
drivers/net/ethernet/cadence/macb_pci.c       | 225 ++++++
5 files changed, 860 insertions(+), 166 deletions(-)

--
2.17.1