[PATCH AUTOSEL 5.1 27/70] net: stmmac: fix csr_clk can't be zero issue
From: Sasha Levin <sashal@kernel.org>
Date: 2019-06-08 11:53:57
Also in:
lkml, stable
Subsystem:
networking drivers, stmmac ethernet driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Maxime Chevallier, Linus Torvalds
From: Biao Huang <redacted>
[ Upstream commit 5e7f7fc538d894b2d9aa41876b8dcf35f5fe11e6 ]
The specific clk_csr value can be zero, and
stmmac_clk is necessary for MDC clock which can be set dynamically.
So, change the condition from plat->clk_csr to plat->stmmac_clk to
fix clk_csr can't be zero issue.
Fixes: cd7201f477b9 ("stmmac: MDC clock dynamically based on the csr clock input")
Signed-off-by: Biao Huang <redacted>
Acked-by: Alexandre TORGUE <redacted>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++---
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 5 ++++-
2 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 8cebc44108b2..635d88d82610 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c@@ -4380,10 +4380,10 @@ int stmmac_dvr_probe(struct device *device, * set the MDC clock dynamically according to the csr actual * clock input. */ - if (!priv->plat->clk_csr) - stmmac_clk_csr_set(priv); - else + if (priv->plat->clk_csr >= 0) priv->clk_csr = priv->plat->clk_csr; + else + stmmac_clk_csr_set(priv); stmmac_check_pcs_mode(priv);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 3031f2bf15d6..f45bfbef97d0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c@@ -408,7 +408,10 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) /* Default to phy auto-detection */ plat->phy_addr = -1; - /* Get clk_csr from device tree */ + /* Default to get clk_csr from stmmac_clk_crs_set(), + * or get clk_csr from device tree. + */ + plat->clk_csr = -1; of_property_read_u32(np, "clk_csr", &plat->clk_csr); /* "snps,phy-addr" is not a standard property. Mark it as deprecated
--
2.20.1