[PATCH net-next 05/10] ARM: dts: keystone-clocks: add input fixed clocks
From: Grygorii Strashko <grygorii.strashko@ti.com>
Date: 2019-06-01 10:46:38
Also in:
linux-arm-kernel, linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Add set of fixed, external input clocks definitions for TIMI0, TIMI1, TSREFCLK clocks. Such clocks can be used as reference clocks for some HW modules (as cpts, for example) by configuring corresponding clock muxes. For these clocks real frequencies have to be defined in board files. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- arch/arm/boot/dts/keystone-clocks.dtsi | 27 ++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)
diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi
index 457515b0736a..0397c3423d2d 100644
--- a/arch/arm/boot/dts/keystone-clocks.dtsi
+++ b/arch/arm/boot/dts/keystone-clocks.dtsi@@ -408,4 +408,31 @@ clocks { reg-names = "control", "domain"; domain-id = <0>; }; + + /* + * Below are set of fixed, input clocks definitions, + * for which real frequencies have to be defined in board files. + * Those clocks can be used as reference clocks for some HW modules + * (as cpts, for example) by configuring corresponding clock muxes. + */ + timi0: timi0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "timi0"; + }; + + timi1: timi1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "timi1"; + }; + + tsrefclk: tsrefclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "tsrefclk"; + }; };
--
2.17.1