I'm not sure that I like the semantic of it, because the driver can actually
support VID 0 per-se, only the kernel does not use VLAN 0. Thus I would avoid
calling the port_vlan_del() ops for VID 0, directly into the upper DSA layer.

Florian, Andrew, wouldn't the following patch be more adequate?

    diff --git a/net/dsa/slave.c b/net/dsa/slave.c
    index 1e2ae9d59b88..80f228258a92 100644
    --- a/net/dsa/slave.c
    +++ b/net/dsa/slave.c
    @@ -1063,6 +1063,10 @@ static int dsa_slave_vlan_rx_kill_vid(struct net_device *dev, __be16 proto,
            struct bridge_vlan_info info;
            int ret;
     
    +       /* VID 0 has a special meaning and is never programmed in hardware */
    +       if (!vid)
    +               return 0;
    +
            /* Check for a possible bridge VLAN entry now since there is no
             * need to emulate the switchdev prepare + commit phase.
             */

 
Hi Vivien

If we put this in rx_kill_vid, we should probably have something
similar in rx_add_vid, just in case the kernel does start using VID 0.

	Andrew