Re: [net-next,v4 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems

On Tue, May 28, 2019 at 04:02:33PM -0700, Ruslan Babayev wrote:

Lookup I2C adapter using the "i2c-bus" device property on ACPI based
systems similar to how it's done with DT.

An example DSD describing an SFP on an ACPI based system:

Device (SFP0)
{
    Name (_HID, "PRP0001")
    Name (_CRS, ResourceTemplate()
    {
        GpioIo(Exclusive, PullDefault, 0, 0, IoRestrictionNone,
               "\\_SB.PCI0.RP01.GPIO", 0, ResourceConsumer)
            { 0, 1, 2, 3, 4 }
    })
    Name (_DSD, Package ()
    {
        ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
        Package () {
            Package () { "compatible", "sff,sfp" },
            Package () { "i2c-bus", \_SB.PCI0.RP01.I2C.MUX.CH0 },
            Package () { "maximum-power-milliwatt", 1000 },
            Package () { "tx-disable-gpios", Package () { ^SFP0, 0, 0, 1} },
            Package () { "reset-gpio",       Package () { ^SFP0, 0, 1, 1} },
            Package () { "mod-def0-gpios",   Package () { ^SFP0, 0, 2, 1} },
            Package () { "tx-fault-gpios",   Package () { ^SFP0, 0, 3, 0} },
            Package () { "los-gpios",        Package () { ^SFP0, 0, 4, 1} },
        },
    })
}

Device (PHY0)
{
    Name (_HID, "PRP0001")
    Name (_DSD, Package ()
    {
        ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
        Package () {
            Package () { "compatible", "ethernet-phy-ieee802.3-c45" },
            Package () { "sfp", \_SB.PCI0.RP01.SFP0 },
            Package () { "managed", "in-band-status" },
            Package () { "phy-mode", "sgmii" },
        },
    })
}

Signed-off-by: Ruslan Babayev <redacted>
Cc: xe-linux-external@cisco.com

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew