[v2, PATCH 2/4] net: stmmac: fix csr_clk can't be zero issue
From: Biao Huang <hidden>
Date: 2019-05-14 02:29:15
Also in:
linux-arm-kernel, linux-mediatek, lkml
Subsystem:
networking drivers, stmmac ethernet driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Maxime Chevallier, Linus Torvalds
The specific clk_csr value can be zero, and stmmac_clk is necessary for MDC clock which can be set dynamically. So, change the condition from plat->clk_csr to plat->stmmac_clk to fix clk_csr can't be zero issue. Signed-off-by: Biao Huang <redacted> --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++--- .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 5 ++++- 2 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 906f2be..a905b63 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c@@ -4374,10 +4374,10 @@ int stmmac_dvr_probe(struct device *device, * set the MDC clock dynamically according to the csr actual * clock input. */ - if (!priv->plat->clk_csr) - stmmac_clk_csr_set(priv); - else + if (priv->plat->clk_csr >= 0) priv->clk_csr = priv->plat->clk_csr; + else + stmmac_clk_csr_set(priv); stmmac_check_pcs_mode(priv);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 3031f2b..f45bfbe 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c@@ -408,7 +408,10 @@ struct plat_stmmacenet_data * /* Default to phy auto-detection */ plat->phy_addr = -1; - /* Get clk_csr from device tree */ + /* Default to get clk_csr from stmmac_clk_crs_set(), + * or get clk_csr from device tree. + */ + plat->clk_csr = -1; of_property_read_u32(np, "clk_csr", &plat->clk_csr); /* "snps,phy-addr" is not a standard property. Mark it as deprecated
--
1.7.9.5