[PATCH 3/7] net: stmmac: dma channel control register need to be init first
From: Weifeng Voon <hidden>
Date: 2019-04-24 09:16:44
Also in:
lkml
Subsystem:
networking drivers, stmmac ethernet driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
stmmac_init_chan() needs to be called before stmmac_init_rx_chan() and stmmac_init_tx_chan(). This is because if PBLx8 is to be used, "DMA_CH(#i)_Control.PBLx8" needs to be set before programming "DMA_CH(#i)_TX_Control.TxPBL" and "DMA_CH(#i)_RX_Control.RxPBL". Reviewed-by: Zhang, Baoli <redacted> Signed-off-by: Weifeng Voon <redacted> Signed-off-by: Ong Boon Leong <redacted> --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index a26e36d..ec031e3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c@@ -2208,6 +2208,10 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) if (priv->plat->axi) stmmac_axi(priv, priv->ioaddr, priv->plat->axi); + /* DMA CSR Channel configuration */ + for (chan = 0; chan < dma_csr_ch; chan++) + stmmac_init_chan(priv, priv->ioaddr, priv->plat->dma_cfg, chan); + /* DMA RX Channel Configuration */ for (chan = 0; chan < rx_channels_count; chan++) { rx_q = &priv->rx_queue[chan];
@@ -2233,10 +2237,6 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) tx_q->tx_tail_addr, chan); } - /* DMA CSR Channel configuration */ - for (chan = 0; chan < dma_csr_ch; chan++) - stmmac_init_chan(priv, priv->ioaddr, priv->plat->dma_cfg, chan); - return ret; }
--
1.9.1