[PATCH net-next v2 1/3] dt-bindings: net: phy: add g12a mdio mux documentation
From: Jerome Brunet <jbrunet@baylibre.com>
Date: 2019-03-29 14:15:27
Also in:
linux-amlogic, linux-devicetree, lkml
Subsystem:
ethernet phy library, networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add documentation for the device tree bindings of the MDIO mux of Amlogic g12a SoC family Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- .../bindings/net/mdio-mux-meson-g12a.txt | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/mdio-mux-meson-g12a.txt
diff --git a/Documentation/devicetree/bindings/net/mdio-mux-meson-g12a.txt b/Documentation/devicetree/bindings/net/mdio-mux-meson-g12a.txt
new file mode 100644
index 000000000000..3a96cbed9294
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio-mux-meson-g12a.txt@@ -0,0 +1,48 @@ +Properties for the MDIO bus multiplexer/glue of Amlogic G12a SoC family. + +This is a special case of a MDIO bus multiplexer. It allows to choose between +the internal mdio bus leading to the embedded 10/100 PHY or the external +MDIO bus. + +Required properties in addition to the generic multiplexer properties: +- compatible : amlogic,g12a-mdio-mux +- reg: physical address and length of the multiplexer/glue registers +- clocks: list of clock phandle, one for each entry clock-names. +- clock-names: should contain the following: + * "pclk" : peripheral clock. + * "clkin0" : platform crytal + * "clkin1" : SoC 50MHz MPLL + +Example : + +mdio_mux: mdio-multiplexer@4c000 { + compatible = "amlogic,g12a-mdio-mux"; + reg = <0x0 0x4c000 0x0 0xa4>; + clocks = <&clkc CLKID_ETH_PHY>, + <&xtal>, + <&clkc CLKID_MPLL_5OM>; + clock-names = "pclk", "clkin0", "clkin1"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + + ext_mdio: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + int_mdio: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + internal_ephy: ethernet-phy@8 { + compatible = "ethernet-phy-id0180.3301", + "ethernet-phy-ieee802.3-c22"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <8>; + max-speed = <100>; + }; + }; +};
--
2.20.1