Re: [PATCH net-next v3 0/2] net: phy: at803x: Update delays for RGMII modes

Hi Vinod,

On 19/02/2019 8.17, Vinod Koul wrote:

Peter[1] reported that patch cd28d1d6e52e: ("net: phy: at803x: Disable
phy delay for RGMII mode") caused regression on am335x-evmsk board.
This board expects the Phy delay to be enabled but specified RGMII mode
which refers to delays being disabled. So fix this by disabling delay only
for RGMII mode and enable for RGMII_ID and RGMII_TXID/RXID modes.

While at it, as pointed by Dave, don't inline the helpers.

[1]: https://www.spinics.net/lists/netdev/msg550749.html

Not sure what was changed since v2, but with
https://patchwork.ozlabs.org/project/netdev/list/?series=92672
ethernet is working on am335x-evmsk. thank you:

Tested-by: Peter Ujfalusi <redacted>

Vinod Koul (2):
  net: phy: at803x: don't inline helpers
  net: phy: at803x: disable delay only for RGMII mode

 drivers/net/phy/at803x.c | 51 ++++++++++++++++++++++++++++++----------
 1 file changed, 38 insertions(+), 13 deletions(-)

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki