Re: [PATCH 3/4] mwifiex: Flag wake-up interrupt as IRQ_NOAUTOEN rather than disabling it too late
From: Brian Norris <briannorris@chromium.org>
Date: 2019-02-26 23:31:37
Also in:
linux-arm-kernel, linux-devicetree, linux-rockchip, linux-wireless, lkml
Hi Marc, On Sun, Feb 24, 2019 at 02:04:25PM +0000, Marc Zyngier wrote:
The mwifiex driver makes unsafe assumptions about the state of the wake-up interrupt. It requests it and only then disable it. Of course, the interrupt may be screaming for whatever reason at that time, and the handler will then be called without the interrupt having been registered with the PM/wakeup subsystem. Oops. The right way to handle this kind of situation is to flag the interrupt with IRQ_NOAUTOEN before requesting it. It will then stay disabled until someone (the wake-up subsystem) enables it. Signed-off-by: Marc Zyngier <redacted>
This could be:
Fixes: 853402a00823 ("mwifiex: Enable WoWLAN for both sdio and pcie")
although, that was just borrowing the existing antipattern from SDIO
code..
Reviewed-by: Brian Norris <briannorris@chromium.org>
Thanks.
quoted hunk ↗ jump to hunk
--- drivers/net/wireless/marvell/mwifiex/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)diff --git a/drivers/net/wireless/marvell/mwifiex/main.c b/drivers/net/wireless/marvell/mwifiex/main.c index 2105c2b7c627..82cf35e50579 100644 --- a/drivers/net/wireless/marvell/mwifiex/main.c +++ b/drivers/net/wireless/marvell/mwifiex/main.c@@ -1610,6 +1610,7 @@ static void mwifiex_probe_of(struct mwifiex_adapter *adapter) "wake-up interrupt outside 'wake-up' subnode of %pOF\n", adapter->dt_node); + irq_set_status_flags(adapter->irq_wakeup, IRQ_NOAUTOEN); ret = devm_request_irq(dev, adapter->irq_wakeup, mwifiex_irq_wakeup_handler, IRQF_TRIGGER_LOW, "wifi_wake", adapter);@@ -1619,7 +1620,6 @@ static void mwifiex_probe_of(struct mwifiex_adapter *adapter) goto err_exit; } - disable_irq(adapter->irq_wakeup); if (device_init_wakeup(dev, true)) { dev_err(dev, "fail to init wakeup for mwifiex\n"); goto err_exit;-- 2.20.1