[PATCH V2 3/8] dt-bindings: net: stmmac: add phys config properties
From: Christophe Roullier <hidden>
Date: 2019-02-22 08:29:30
Also in:
linux-arm-kernel, linux-devicetree, lkml
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add properties to support all Phy config PHY_MODE (MII,GMII, RMII, RGMII) and in normal, PHY wo crystal (25Mhz), PHY wo crystal (50Mhz), No 125Mhz from PHY config. Signed-off-by: Christophe Roullier <redacted> --- Documentation/devicetree/bindings/net/stm32-dwmac.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
index 1341012..f42dc68 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt@@ -24,9 +24,9 @@ Required properties: encompases the glue register, and the offset of the control register. Optional properties: -- clock-names: For MPU family "mac-clk-ck" for PHY without quartz -- st,int-phyclk (boolean) : valid only where PHY do not have quartz and need to be clock - by RCC +- clock-names: For MPU family "eth-ck" for PHY without quartz +- st,eth_clk_sel (boolean) : set this property in RGMII PHY when you do not want use 125Mhz +- st,eth_ref_clk_sel (boolean) : set this property in RMII mode when you have PHY without crystal 50MHz Example:
--
2.7.4