RE: [PATCH 0/3] can: flexcan: add imx8qm support

Kindly Ping...

Best Regards,
Joakim Zhang

-----Original Message-----
From: Joakim Zhang
Sent: 2019年1月17日 14:28
To: mkl@pengutronix.de; linux-can@vger.kernel.org
Cc: wg@grandegger.com; netdev@vger.kernel.org;
linux-kernel@vger.kernel.org; dl-linux-imx [off-list ref]
Subject: RE: [PATCH 0/3] can: flexcan: add imx8qm support


Kindly Ping...

Best Regards,
Joakim Zhang

quoted

-----Original Message-----
From: Joakim Zhang
Sent: 2018年12月19日 16:39
To: mkl@pengutronix.de; linux-can@vger.kernel.org
Cc: wg@grandegger.com; netdev@vger.kernel.org;
linux-kernel@vger.kernel.org; dl-linux-imx [off-list ref]; Joakim
Zhang [off-list ref]
Subject: [PATCH 0/3] can: flexcan: add imx8qm support

This patch set intends to add Flexcan support for i.MX8QM platform
which defaultly supports CAN FD protocol. Although BRS enabled by
system reset when the driver sets CAN FD mode, now this patch serial
does not support BRS in the driver. And then I will send patch to
enable BRS by changing the register to set bit timing.

Dong Aisheng (3):
  can: rx-offload: add CANFD support based on offload
  can: flexcan: add CAN FD mode support
  can: flexcan: add imx8qm support

 drivers/net/can/flexcan.c      | 114

++++++++++++++++++++++++++++++---

quoted

 drivers/net/can/rx-offload.c   |  16 +++--
 include/linux/can/rx-offload.h |   4 +-
 3 files changed, 117 insertions(+), 17 deletions(-)

--
2.17.1