[PATCH net-next v2 09/10] net: mvpp2: Add 2.5GBaseT support
From: Maxime Chevallier <maxime.chevallier@bootlin.com>
Date: 2019-02-07 09:50:36
Also in:
linux-arm-kernel, lkml
Subsystem:
marvell mvpp2 ethernet driver, networking drivers, the rest · Maintainers:
Marcin Wojtas, Russell King, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
The PPv2 controller is able to support 2.5G speeds, allowing to use 2.5GBASET in conjunction with PHYs that use 2500BASEX as their MII interface when using this mode. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> --- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 5c0c26fd8363..6f36aed5bd0a 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c@@ -4410,6 +4410,7 @@ static void mvpp2_phylink_validate(struct net_device *dev, case PHY_INTERFACE_MODE_2500BASEX: phylink_set(mask, 1000baseT_Full); phylink_set(mask, 1000baseX_Full); + phylink_set(mask, 2500baseT_Full); phylink_set(mask, 2500baseX_Full); break; default:
--
2.19.2