[PATCH net-next 6/7] net: mvpp2: Add 2.5GBaseT support
flat view
STALE2815d
SUPERSEDED
From: Maxime Chevallier <maxime.chevallier@bootlin.com>
Date: 2019-01-18 15:24:48
Also in:
linux-arm-kernel, lkml
Subsystem:
marvell mvpp2 ethernet driver, networking drivers, the rest · Maintainers:
Marcin Wojtas, Russell King, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Revision v1 of 2 in this series.
Revisions (2)
- v1 current
- v2 [diff vs current]
The PPv2 controller is able to support 2.5G speeds, allowing to use 2.5GBASET in conjunction with PHYs that use 2500BASEX as their MII interface when using this mode. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> --- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 16066c2d5b3a..82f210c7e3e9 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c@@ -4414,6 +4414,7 @@ static void mvpp2_phylink_validate(struct net_device *dev, case PHY_INTERFACE_MODE_2500BASEX: phylink_set(mask, 1000baseT_Full); phylink_set(mask, 1000baseX_Full); + phylink_set(mask, 2500baseT_Full); phylink_set(mask, 2500baseX_Full); break; default:
--
2.19.2