Thread (5 messages) 5 messages, 3 authors, 2018-12-03

Re: [RFC PATCH net v2] net: phy: Fix the issue that netif always links up after resuming

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2018-11-30 17:46:52
Also in: lkml


On 11/30/2018 1:25 AM, Kunihiko Hayashi wrote:
quoted hunk ↗ jump to hunk
Even though the link is down before entering hibernation,
there is an issue that the network interface always links up after resuming
from hibernation.

The phydev->state is PHY_READY before enabling the network interface, so
the link is down. After resuming from hibernation, the phydev->state is
forcibly set to PHY_UP in mdio_bus_phy_restore(), and the link becomes up.

This patch adds a new convenient function to check whether the PHY is in
a started state, and expects to solve the issue by changing phydev->state
to PHY_UP and calling phy_start_machine() only when the PHY is started.

Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 drivers/net/phy/phy.c        |  2 +-
 drivers/net/phy/phy_device.c |  9 +++++----
 include/linux/phy.h          | 10 ++++++++++
 3 files changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 1d73ac3..f484d03 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -670,7 +670,7 @@ void phy_stop_machine(struct phy_device *phydev)
 	cancel_delayed_work_sync(&phydev->state_queue);
 
 	mutex_lock(&phydev->lock);
-	if (phydev->state > PHY_UP && phydev->state != PHY_HALTED)
+	if (phy_is_started(phydev))
 		phydev->state = PHY_UP;
 	mutex_unlock(&phydev->lock);
 }
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index ab33d17..2c39717 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -309,10 +309,11 @@ static int mdio_bus_phy_restore(struct device *dev)
 		return ret;
 
 	/* The PHY needs to renegotiate. */
-	phydev->link = 0;
-	phydev->state = PHY_UP;
-
-	phy_start_machine(phydev);
+	if (phy_is_started(phydev)) {
+		phydev->link = 0;
+		phydev->state = PHY_UP;
+		phy_start_machine(phydev);
+	}
Don't you need some of these steps to be performed under phydev->lock
being held? See comment below.
quoted hunk ↗ jump to hunk
 
 	return 0;
 }
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 3ea87f7..c194b45 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -898,6 +898,16 @@ static inline bool phy_is_pseudo_fixed_link(struct phy_device *phydev)
 }
 
 /**
+ * phy_is_started - Convenience function for testing whether a PHY is in
+ * a started state
+ * @phydev: the phy_device struct
+ */
+static inline bool phy_is_started(struct phy_device *phydev)
+{
An assert with the phydev->lock mutex being held here would greatly
help, because otherwise this is possibly racy.
+	return phydev->state >= PHY_UP && phydev->state != PHY_HALTED;
+}
+
+/**
  * phy_write_mmd - Convenience function for writing a register
  * on an MMD on a given PHY.
  * @phydev: The phy_device struct
-- 
Florian
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help