Thread (6 messages) 6 messages, 3 authors, 2018-11-14

[PATCH v2 2/3] arm64: allwinner: h6: add EMAC device nodes

From: Icenowy Zheng <hidden>
Date: 2018-11-03 12:33:28
Also in: linux-arm-kernel, linux-devicetree, lkml
Subsystem: arm/allwinner sunxi soc support, the rest · Maintainers: Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Linus Torvalds

Allwinner H6 SoC has an EMAC like the one in A64.

Add device tree nodes for the H6 DTSI file.

Signed-off-by: Icenowy Zheng <redacted>
---
Changes in v2:
- Dropped unneeded cells property.

 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 28 ++++++++++++++++++++
 1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 040828d2e2c0..11f7ce7d1876 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -149,6 +149,14 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
+			ext_rgmii_pins: rgmii_pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+				       "PD5", "PD7", "PD8", "PD9", "PD10",
+				       "PD11", "PD12", "PD13", "PD19", "PD20";
+				function = "emac";
+				drive-strength = <40>;
+			};
+
 			mmc0_pins: mmc0-pins {
 				pins = "PF0", "PF1", "PF2", "PF3",
 				       "PF4", "PF5";
@@ -258,6 +266,26 @@
 			status = "disabled";
 		};
 
+		emac: ethernet@5020000 {
+			compatible = "allwinner,sun50i-a64-emac",
+				     "allwinner,sun50i-h6-emac";
+			syscon = <&syscon>;
+			reg = <0x05020000 0x10000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		r_ccu: clock@7010000 {
 			compatible = "allwinner,sun50i-h6-r-ccu";
 			reg = <0x07010000 0x400>;
-- 
2.18.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help