Re: ethernet "bus" number in DTS ?

On 10/23/18 9:49 AM, Joakim Tjernlund wrote:

SPI (and others) has a way to define bus number in a aliases:
	aliases {
		ethernet4 = &enet4;
		ethernet0 = &enet0;
		ethernet1 = &enet1;
		ethernet2 = &enet2;
		ethernet3 = &enet3;
		spi0 = &spi0
	};
The 0 in the spi0 alias will translate to bus num 0 so one can control the /dev nodes, like /dev/spidev0
I am looking for the same for ethernet devices:
 ethernet4 = &enet4;  /* should become eth4 */
 ethernet0 = &enet0;  /* should become eth0 */
but I cannot find something like that for eth devices.

Could such functionality be added?

It could, do we want and need to, no. You have the Ethernet alias in
/sys/class/net/*/device/uevent already that would allow you to perform
that (re)naming in user-space:

# cat /sys/class/net/eth0/device/uevent
DRIVER=bcmgenet
OF_NAME=ethernet
OF_FULLNAME=/rdb/ethernet@f0480000
OF_TYPE=network
OF_COMPATIBLE_0=brcm,genet-v5
OF_COMPATIBLE_N=1
OF_ALIAS_0=eth0			<==================
MODALIAS=of:NethernetTnetworkCbrcm,genet-v5
-- 
Florian