Thread (3 messages) 3 messages, 2 authors, 2019-05-21

Re: [PATCH V2 net-next 5/5] ptp: Add a driver for InES time stamping IP core.

flat view

From: Rob Herring <robh@kernel.org>
Date: 2018-10-12 20:42:57
Also in: linux-devicetree

On Sun, Oct 07, 2018 at 10:38:23AM -0700, Richard Cochran wrote:
The InES at the ZHAW offers a PTP time stamping IP core.  The FPGA
logic recognizes and time stamps PTP frames on the MII bus.  This
patch adds a driver for the core along with a device tree binding to
allow hooking the driver to MII buses.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
---
 Documentation/devicetree/bindings/ptp/ptp-ines.txt |  37 +
Bindings should be separate patch.
quoted hunk ↗ jump to hunk
 drivers/ptp/Kconfig                                |  10 +
 drivers/ptp/Makefile                               |   1 +
 drivers/ptp/ptp_ines.c                             | 870 +++++++++++++++++++++
 4 files changed, 918 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/ptp/ptp-ines.txt
 create mode 100644 drivers/ptp/ptp_ines.c
diff --git a/Documentation/devicetree/bindings/ptp/ptp-ines.txt b/Documentation/devicetree/bindings/ptp/ptp-ines.txt
new file mode 100644
index 000000000000..1484b62802c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/ptp/ptp-ines.txt
@@ -0,0 +1,37 @@
+ZHAW InES PTP time stamping IP core
+
+The IP core needs two different kinds of nodes.  The control node
+lives somewhere in the memory map and specifies the address of the
+control registers.  There can be up to three port handles placed as
+attributes of PHY nodes.  These associate a particular MII bus with a
+port index within the IP core.
+
+Required properties of the control node:
+
+- compatible:		"ines,ptp-ctrl"
ines is not registered vendor prefix. Should it be 'zhaw' instead?
+- reg:			physical address and size of the register bank
+- #phandle-cells:	must be one (1)
#timestamper-cells

Or if it is always 1, you could omit it.
quoted hunk ↗ jump to hunk
+
+Required format of the port handle within the PHY node:
+
+- timestamper:		provides control node reference and
+			the port channel within the IP core
This and #timestamper-cells need to be in a common binding doc.

And bonus points if you add a check in dtc for this. Should be a 
one-liner.
quoted hunk ↗ jump to hunk
+
+Example:
+
+	tstamper: timestamper@60000000 {
+		compatible = "ines,ptp-ctrl";
+		reg = <0x60000000 0x80>;
+		#phandle-cells = <1>;
+	};
+
+	ethernet@80000000 {
+		...
+		mdio {
+			...
+			phy@3 {
+				...
+				timestamper = <&tstamper 0>;
+			};
+		};
+	};
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help