[Patch V5 net 07/11] net: hns3: bugfix for hclge_mdio_write and hclge_mdio_read
From: Huazhong Tan <hidden>
Date: 2018-10-30 22:44:27
Subsystem:
hisilicon network subsystem 3 driver (hns3), hisilicon network subsystem driver, networking drivers, the rest · Maintainers:
Jian Shen, Jijie Shao, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
When there is a PHY, the driver needs to complete some operations through
MDIO during reset reinitialization, so HCLGE_STATE_CMD_DISABLE is more
suitable than HCLGE_STATE_RST_HANDLING to prevent the MDIO operation from
being sent during the hardware reset.
Fixes: b50ae26c57cb ("net: hns3: never send command queue message to IMP when reset)
Signed-off-by: Huazhong Tan <redacted>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
index 24b1f2a..0301863 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c@@ -52,7 +52,7 @@ static int hclge_mdio_write(struct mii_bus *bus, int phyid, int regnum, struct hclge_desc desc; int ret; - if (test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state)) + if (test_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state)) return 0; hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MDIO_CONFIG, false);
@@ -90,7 +90,7 @@ static int hclge_mdio_read(struct mii_bus *bus, int phyid, int regnum) struct hclge_desc desc; int ret; - if (test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state)) + if (test_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state)) return 0; hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MDIO_CONFIG, true);
--
2.7.4